Server User Manual

For the SPARC M10-4S with a FRAME-B CPU memory unit

Fix the CPU memory unit board with six screws.

Install the XSCF mount and fix it with screws.

For the SPARC M10-4/M10-4S with a FRAME-A CPU memory unit

Align the one point on the left and two points on the right of the XSCF mount

with the frame guides of the CPU memory unit lower. Then, install the XSCF

mount by sliding it to the front and fix it with one screw.

Figure 7-51

Installing the XSCF mount (for the SPARC M10-4/M10-4S with a

FRAME-A CPU memory unit)

For the SPARC M10-4S with a FRAME-B CPU memory unit

Align the left protruding part (A in the figure) of the XSCF mount with the

frame guide of the CPU memory unit lower to install the XSCF mount. Then,

fix it with two screws (B in the figure).

Chapter 7 Maintaining the CPU Memory Units 131