Server User Manual

Note -
To expand or reduce a CPU memory unit upper, it is first necessary to remove the
CPU memory unit lower.
7.4.2 Removing the CPU memory unit lower
This section describes the procedure for removing a CPU memory unit lower.
1.
Loosen the screws securing the levers of the CPU memory unit lower (rear
left side) and then lower the right and left levers of the CPU memory unit
lower to the horizontal position.
Figure 7-9
Position of the screws and the levers of the CPU memory unit lower
2.
Hold the right and left levers of the CPU memory unit lower and pull out the
CPU memory unit lower about 10 cm (3.9 in.)
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
December 201396