Datasheet

Data Sheet Fujitsu Server PRIMERGY TX150 S8 Mono-Socket Intel® Xeon® processor server
Page 3 / 8 www.fujitsu.com/fts
Technical details
PRIMERGY TX150 S8
Housing types Tower Tower Tower Tower
Storage drive architecture 3.5-inch 3.5-inch 2.5-inch 2.5-inch
Power supply Standard Hot-plug Standard Hot-plug
Mainboard
Mainboard type D 3079
Chipset Intel® C602
Processor quantity and type 1 x Intel® Pentium® processor / Intel® Xeon® processor E5-1400 product family / Intel® Xeon® processor E5-2400
product family
Memory slots 6 (6 DIMMs, 3 channels with 2 slots per channel)
Memory slot type DIMM (DDR3)
Memory capacity (min. - max.) 2 GB - 96 GB
Memory protection Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Hot-spare memory support
Memory Mirroring support
Memory notes max. 96 GB registered; min. 2 GB unbuffered; Memory Mirroring with identical modules in both channel pairs of a
bank (2 modules per bank). Rank sparing with identical modules within the same channel. Performance Mode with
identical modules in all channels of each bank per CPU.
Interfaces
USB 2.0 ports 9 x USB 2.0 (2x front, 4x rear, 3x internal for backup, UFM and internal USB)
Graphics (15-pin) 1 x VGA
Serial 1 (9-pin) 1 x serial RS-232-C, usable for iRMC or system or shared
LAN / Ethernet (RJ-45) 2 x Gbit/s Ethernet
Service LAN (RJ45) 1 x dedicated management LAN port for iRMC S3 (10/100/1000 Mbit/s)
Service LAN trafc can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID controller additional RAID controller options are described under Components RAID controller
SATA Controller Intel® C602, 2 ports used for accessible drives
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;
SATA controller type notes On board SATA controller supports RAID levels 0, 1, 10
Remote Management Controller Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
Trusted Platform Module (TPM) Inneon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 3.0 x4 (mech. x8) 2 x Full height 280 mm length
PCI-Express 3.0 x16 1 x Full height 280 mm length
PCI-Express 2.0 x1 (mech. x16) 1 x Full height 170 mm length
PCI-Express 2.0 x4 (mech. x8) 1 x Full height 230 mm length; preferred RAID slot
PCI-slots 1 x PCI 32/33 MHz, 1x long, 5V
Slot Notes in SAS conguration 1x PCI-Express occupied by modular RAID controller.
Drive bays
Storage drive bays 3.5-inch or 2.5-inch hot-plug SAS/SATA
Accessible drive bays 3 x 5.25/1.6-inch
Notes accessible drives all possible options described in relevant system congurator
Drive bays (Base unit specic)
Storage drive bays Max 8 (4 + 4) x 3.5-inch Max 16 (8 + 8) x 2.5-inch Max 16 (8+ 8) x 2.5-inch