Datasheet

Data Sheet Fujitsu CELSIUS R920 Workstation
Page 4 / 8 www.fujitsu.com/fts/CELSIUS
Fujitsu recommends Windows 8 Pro.
Interface add on cards/components
(optional)
WLAN III, 802.11g/Draft-n (Windows only, dedicated regions only)
USB 3.0 PCIe x1
Serial Interface FH
InniBand HCA 40Gb/s, 2-Port, QDR
InniBand HCA 40Gb/s, 1-Port, QDR
Gigabit Ethernet PCIe x1, DS
Gigabit Ethernet PCIe x1
eSATA Interface
Dual serial card PCIe x1, powered
Dual serial card PCIe x1
Dual 1 Gigabit Ethernet PCIe x4
Dual 10 Gigabit Ethernet PCIe x8
Interface add on/component note 1x eSATA interface already on board
Drives up to 8x 2.5” HDDs (cold plug) and 1x 2.5” SSD or
up to 4x 3.5” HDDs (cold plug) and 1x 2.5” SSD or
up to 2x 2.5” and 2x 3.5” HDD (cold plug) and 1x 2.5” SSD
Base unit CELSIUS R920 CELSIUS R920 power
Mainboard
Mainboard type D3118
Formfactor proprietary
Chipset Intel® C602
Processor socket Socket R
Processor quantity maximum 2
Memory slots 16 (8 per processor) DIMM (DDR3) registered
Supported capacity RAM (max.) 512 GB
Memory notes In congurations with 4 GB and more the visible memory may be reduced to approximately 3.5 GB or less (for 32-bit
operating systems) and congurations with 8 GB the visible memory may be reduced to approximately 7.5 GB or less
(depending on system conguration).
Large memory may lead to long boot times.
When using a 32-bit operating system the maximum of memory might be 900 MB.
LAN 2x Built-in 10/100/1000 MBit/s Intel® 82579 LM and Intel® 82574L
Audio codec Conexant CX20642
Audio features High Denition Audio
I/O controller on board
Serial ATA total 7
thereof SATA III 2
thereof eSATA 1
SATA RAID support 0, 1, 10, 5
SAS Controller type optional upgrade to 8 ports, Intel C606
SAS RAID support 0, 1, 10
Interfaces
Audio: in (rear) 1
Audio: out (rear) 1
Audio: in 1
Audio: out 1
Internal speakers 1
USB 2.0 total 11
USB 3.0 total 2
USB front 4 (2x USB 3.0)