Datasheet

Data Sheet Fujitsu PRIMERGY RX100 S7 Mono socket 1 U rack server
Page 3 / 8 http://ts.fujitsu.com/Primergy
Technical details
PRIMERGY RX100 S7
Hard disk architecture 3.5” SAS/SATA 3.5” SAS/SATA 2.5” SAS/SATA 2.5” SAS/SATA
Power supply Standard Hotplug Standard Hotplug
Mainboard
Mainboard type D 3034
Chipset Intel® C202
Processor quantity and type 1 x Intel® Core™ i3 processor / Intel® Pentium® processor / Intel® Xeon® processor E3 series
Processor Intel® Core™ i3-2100 processor
(2C/4T, 3.10 GHz, TLC: 3 MB, Turbo: No, 1333 MHz, 65 W)
Intel® Core™ i3-2120 processor
(2C/4T, 3.30 GHz, TLC: 3 MB, Turbo: No, 1333 MHz, 65 W)
Intel® Pentium® processor G620
(2C/2T, 2.60 GHz, TLC: 3 MB, Turbo: No, 1066 MHz, 65 W)
Intel® Xeon® processor E3-1220
(4C/4T, 3.10 GHz, TLC: 8 MB, Turbo: 3.40 GHz, 1333 MHz, 80 W)
Intel® Xeon® processor E3-1220L
(2C/4T, 2.20 GHz, TLC: 3 MB, Turbo: 3.40 GHz, 1333 MHz, 20 W)
Intel® Xeon® processor E3-1230
(4C/8T, 3.20 GHz, TLC: 8 MB, Turbo: 3.60 GHz, 1333 MHz, 80 W)
Intel® Xeon® processor E3-1240
(4C/8T, 3.30 GHz, TLC: 8 MB, Turbo: 3.70 GHz, 1333 MHz, 80 W)
Intel® Xeon® processor E3-1260L
(4C/8T, 2.40 GHz, TLC: 8 MB, Turbo: 3.30 GHz, 1333 MHz, 45 W)
Intel® Xeon® processor E3-1270
(4C/8T, 3.40 GHz, TLC: 8 MB, Turbo: 3.80 GHz, 1333 MHz, 80 W)
Intel® Xeon® processor E3-1280
(4C/8T, 3.50 GHz, TLC: 8 MB, Turbo: 3.90 GHz, 1333 MHz, 95 W)
Memory slots 4 (2 banks with 2 DIMMs each)
Memory slot type DIMM (DDR3) UDIMM
Memory capacity (min. - max.) 2 GB - 32 GB
Memory protection ECC
Memory notes Dual channel support. For dual channel performance, a minimum of 2 memory modules have to be ordered. Capacity
per channel has to be the same.
Memory modules 2 GB (1 module(s) 2 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
Interfaces
USB ports 7 x (2x front, 4x back, 1x internal for UFM)
Graphics (15-pin) 1 x VGA (15-pin)
Serial connection 1 x serial RS-232-C, usable for iRMC or system or shared
LAN / Ethernet (RJ-45) 2 x Gbit/s Ethernet
Service LAN (RJ45) 1 x dedicated Service LAN port for iRMC S3 (10/100/1000 Mbit/s)
Service LAN trafc can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID Controller Integrated RAID 0/1 or RAID 5/6 controller (option)
See under Components RAID controller
SATA Controller Intel® C202, 1 port used for accessible drive
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;