User manual
Table Of Contents
- Declarations of conformity
- Fujitsu Contact Information
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching the notebook on
- Switching the notebook off
- Keyboard
- Touchpad and touchpad buttons
- Touchscreen/LCD screen without touch function (device-dependent)
- Webcam
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- Speaker and microphones
- Wireless€LAN/Bluetooth wireless components
- Ethernet and LAN
- Your USB Type-C dock (optional)
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Troubleshooting and tips
- Help if problems occur
- Reset by switching the battery off
- If you need to restore your system
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen of the notebook is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook does not start after switching it on
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- Smart Card reader is not recognized
- Smart Card PIN forgotten
- Smart Card lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Appendix
Troubleshooting and tips
Error message/cause Troublesho oting
Previous boot incomplete - Default configuration
used Default values have been set for certain
settings because of an error which occurred in
the previous system boot. Check the settings in
the BIOS Setup.
► Press the
F1
function key when prom
pted
to do so.
Real time clock error
► Contact your sales outlet or
our cust omer
service center.
nnnnK Shadow RAM failed a
t offset: xxxx Fa ilin g
Bits: zzzz
► Contact your sales outlet or our customer
service center.
System battery is dead - Replace and run SETUP
► Contact your sales outlet or our customer
service center.
System cache error - Cache disabled
► Contact your sales out
let or our customer
service center.
System timer error
► Contact your sales outlet or our customer
service center.
64 Fujitsu