User manual
Table Of Contents
- Declarations of conformity
- Fujitsu Contact Information
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching the notebook on
- Switching the notebook off
- Keyboard
- Touchpad and touchpad buttons
- Touchscreen/LCD screen without touch function (device-dependent)
- Webcam
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- Speaker and microphones
- Wireless€LAN/Bluetooth wireless components
- Ethernet and LAN
- Your USB Type-C dock (optional)
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Troubleshooting and tips
- Help if problems occur
- Reset by switching the battery off
- If you need to restore your system
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen of the notebook is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook does not start after switching it on
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- Smart Card reader is not recognized
- Smart Card PIN forgotten
- Smart Card lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Appendix
Connecting external devices
USB port with charging function (USB Type-C)
USBportwithchargingfunction(USBType-C)
This USB port allows you to operate and charge the notebook using the optional
dock (see "
Connect the notebook to the dock", Page 40).
You c an also charge a connected USB device or operate devices without an additional power supply.
This is also possible with the notebook switched off, if the U SB Type-C Power Delivery
on System-Off function is activated in the Advanced - M iscellaneous Configurations menu
of the BIOS Setup Utility. Calling up and using the B IOS S etu p Utility is described
in section "
Settings in BIOS Setup Utility", P age 55.
USB devices are ho t-pluggable. This means you c an connect and disconnect the
cables of USB devices while the operating system is running.
Additional information can be found in the d ocumentation for the USB devices.
+
► Connect the data cable to the
external device.
► Connect the data cable to a USB port
(USB Type-C ) on the notebook.
Fujitsu 51