User manual
Table Of Contents
- Declarations of conformity
- Fujitsu Contact Information
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching the notebook on
- Switching the notebook off
- Keyboard
- Touchpad and touchpad buttons
- Touchscreen/LCD screen without touch function (device-dependent)
- Webcam
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- Speaker and microphones
- Wireless€LAN/Bluetooth wireless components
- Ethernet and LAN
- Your USB Type-C dock (optional)
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Troubleshooting and tips
- Help if problems occur
- Reset by switching the battery off
- If you need to restore your system
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen of the notebook is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook does not start after switching it on
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- Smart Card reader is not recognized
- Smart Card PIN forgotten
- Smart Card lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Appendix
Important notes
Additional safety notes for devices with
wireless components
Wirelesscom ponentsWirelessLANBluetooth,Safetynotes
If a wireless component (Wireless LAN, Bluetooth) is incorporated in your notebo ok, you must
be sure to observe the following safety notes when using your n otebook:
• Switch off the wireless components when you are in an aircra ft or driving in a car.
• Switch off the wireless components when you are in a hospital, a n operating
room or near a medical electronics system. The transmitted radio waves
can impair the operation of medical devices.
• Switch off the wireless co mponents, when you let the device get near flammable
gases or into hazardous environments (e.g. gas station, paintshops), as the
transmitted radio waves can c ause an explosion or a fire.
For further information on how to switch the wireless components on and off, refer
to chapter "
Switching the wireless components on and off", Page 36.
Energy saving
NotesEnergyPowersaving
Switch the notebo
ok off when it is not in use . Switch off any connected external devices when
they are not in us
e. If you use the energy saving functions, the notebook uses less power. You
will then be abl
e to work for longer before having to recharge the battery.
The energy effic
iency is increased and environm ental pollution is reduced .
You save money
and help protect the environment.
Energy savin
g under Windows
► Make use of the available energy saving functions as described in chapt er
"
Using the energy saving functions", Page 34.
Traveling with your notebook
Mobileo
peration
NotesTran spo
rt
Noteboo
k
Please ob
serve the points listed below when traveling with your notebook.
Fujitsu 13