User manual
Table Of Contents
- FUJITSU LIFEBOOK T726
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Opening the notebook
- Switching on the notebook
- Different ways to use your notebook
- Switching off the notebook
- Closing the notebook
- Handwriting recognition
- LCD screen
- Using the device as a Tablet PC
- Using the device as a notebook
- Keyboard
- Tablet buttons
- Camera (dependent on configuration)
- Rechargeable battery
- Module
- Optical drive
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card
- Wireless LAN€/ Bluetooth€/ UMTS€/ LTE wireless components (dependent on configuration)
- Ethernet and LAN
- Your Port Replicator (optional)
- Security functions
- Brief overview of security functions
- Configuring the fingerprint sensor
- Using the Security Lock
- Configuring password protection in BIOS Setup Utility
- SmartCard reader
- SmartCard SystemLock (dependent on configuration)
- Access rights of SmartCards
- SmartCard user groups
- Installing SystemLock
- Setting up the first system in a user group or a stand-alone system for use with SystemLock
- Adding a system to a user group
- Carrying out administrator functions
- Remote Access Enabling – F4
- Switch on the device using SystemLock
- Start BIOS Setup F2
- Changing PIN
- Uninstall SystemLock
- Error messages
- Trusted Platform Module - TPM (dependent on configuration)
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The notebook's date or time is incorrect
- Battery indicator does not illuminate
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- User and/or supervisor SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the contents of the hard disk under Windows
- Technical data
- Manufacturer’s notes
- Index
Security functions
Error messages
Errormessages
In this chapter you will find the error messages which are generated by the
mainboard and the SmartCard reader.
Error Cause
Boot access denied
The SmartCard has no access rights to the system.
Check your
SmartCard
The SmartCard is either inserted incorrectly or it is not a suitable SystemLock
SmartCard.
SmartCard reader
FA I L U R E
An error has occurred on the serial port to the SmartCard reader. If this error
occurs frequently, the connection between the SmartCard reader and the
mainboard must b e checked, or the SmartCard reader must be replaced.
While the error is present, access to the system is blocked.
Non-authorised
SmartCard
The SmartCard cannot be used on this device. The SmartCard has been
configured for a different device.
SystemLock
installation
FA I L E D :
An error occurred while installing SystemLock. Do not switch off the device,
insert th e "BIOS Flash diskette" instead.
Perform a BIOS update and try the installation process again.
The SmartCard is
blocked.
Enter the PUK:
Yo u have exceeded the maximum allowed number of incorrect PIN entries.
The SmartCard is blocked. Enter the administrator PUK to re-activate the
SmartCard. You must then enter a new User PIN to restart the system.
Fujitsu 83