User manual
Table Of Contents
- FUJITSU LIFEBOOK T726
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Opening the notebook
- Switching on the notebook
- Different ways to use your notebook
- Switching off the notebook
- Closing the notebook
- Handwriting recognition
- LCD screen
- Using the device as a Tablet PC
- Using the device as a notebook
- Keyboard
- Tablet buttons
- Camera (dependent on configuration)
- Rechargeable battery
- Module
- Optical drive
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card
- Wireless LAN€/ Bluetooth€/ UMTS€/ LTE wireless components (dependent on configuration)
- Ethernet and LAN
- Your Port Replicator (optional)
- Security functions
- Brief overview of security functions
- Configuring the fingerprint sensor
- Using the Security Lock
- Configuring password protection in BIOS Setup Utility
- SmartCard reader
- SmartCard SystemLock (dependent on configuration)
- Access rights of SmartCards
- SmartCard user groups
- Installing SystemLock
- Setting up the first system in a user group or a stand-alone system for use with SystemLock
- Adding a system to a user group
- Carrying out administrator functions
- Remote Access Enabling – F4
- Switch on the device using SystemLock
- Start BIOS Setup F2
- Changing PIN
- Uninstall SystemLock
- Error messages
- Trusted Platform Module - TPM (dependent on configuration)
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The notebook's date or time is incorrect
- Battery indicator does not illuminate
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- User and/or supervisor SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the contents of the hard disk under Windows
- Technical data
- Manufacturer’s notes
- Index
Working with the noteb ook
Rechargeable battery
RechargeablebatteryBatteryLife,batteryRechargeablebatteryRechargeablebattery
When not plugged into a mains socket, the notebook runs on its built-in ba ttery. You
can increase the life of the battery by caring for the battery properly. The average
battery life is around 500 charge/discha rge cycles.
You can extend the battery life by taking advantage of the available energy saving functions.
Charging, caring for and maintaining the battery
BatteryBattery
The notebook battery can only be charged when the ambient temperature is
between 5°C / 41°F and max. 35°C / 95°F.
You can charge the battery by connecting the notebook to the mains adapter
(see "
Mains adapter connecting", Page 17).
If the mains adapter is connected when the state of charge of the battery is more than 90%,
charging will not be started. When the s tate of charg e of the battery is less than 90%, the
battery will be charged to 100% as soon as the m ains adapter is connecte d.
If the battery is running low you will hear a warning alarm. If you do not connect the mains adap ter
within five minutes of the warning alarm described above, your notebook will automatically switch off.
monitoring the battery charging level
BatteryBatterystatusmeter
Windows also has a "Battery status meter" in the taskbar for monitoring the battery capacity. When
you place the mouse pointer on the battery symbol, the system displays the battery status.
Battery storage
BatteryBatterySelf-dischar
ge,battery
Chargingcapa
city,battery
Keep the battery pack in a dry environment at between 0°C / 32°F and 30°C / 86 °F. The lower
the temperature at which the batteries are stored, the lower the rate of self-discharge.
If you will be storing batteries for a longer period (longer than two months),
the battery charge level should be approx. 30 %. To prevent exhaustive
discharge which would permanently damage the battery, check the level
of charge of the battery at regular intervals.
To be able to make use of the optimal charging capacity of the batteries, the battery
should be completely discharged and then fully recharged.
If you do not use the batteries for long periods, remove them from the
notebook. N ever store the batteries in the device.
Removing and insta lling the batte ry
Only us
e batteries approved by Fujitsu for your notebook.
Never u
se force when fitting or removing a battery.
Make s
ure that no foreign bodies get into the battery connections.
Never
store a battery for long periods in the discharged state. T his
can m
ake it impossible to recharge.
44 Fujitsu