User manual

First-time setup of your d evice
Selecting a location
SelectingalocationDeviceMainsadapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapt er on a heat-se nsitive surface.
The surface could be damaged as a resu lt.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The underside of the device heats up during normal operation. Prolonged contact
with the skin may b ecome unp leasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.97" away from the device and
its mains adapter to ensure adequ ate v entilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingforo perationMainsadapter
Observe the safety note s in the enclosed "Safety/Regulations" manual.
The supplied power cable conforms to the requ irements of the country in
which you purchased your device. Make sure that the power cable i s approved
for use in the country in which you intend to use it.
3
1
2
► Con nect the power cable (1) to the
mains adapter.
► Plug the mains cable (2) into a mains outlet.
► Connect the mains adapter cable (3) t o
the DC jack (DC IN) of the device.
Fujitsu 17