User manual
Table Of Contents
- FUJITSU LIFEBOOK T726
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Opening the notebook
- Switching on the notebook
- Different ways to use your notebook
- Switching off the notebook
- Closing the notebook
- Handwriting recognition
- LCD screen
- Using the device as a Tablet PC
- Using the device as a notebook
- Keyboard
- Tablet buttons
- Camera (dependent on configuration)
- Rechargeable battery
- Module
- Optical drive
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card
- Wireless LAN€/ Bluetooth€/ UMTS€/ LTE wireless components (dependent on configuration)
- Ethernet and LAN
- Your Port Replicator (optional)
- Security functions
- Brief overview of security functions
- Configuring the fingerprint sensor
- Using the Security Lock
- Configuring password protection in BIOS Setup Utility
- SmartCard reader
- SmartCard SystemLock (dependent on configuration)
- Access rights of SmartCards
- SmartCard user groups
- Installing SystemLock
- Setting up the first system in a user group or a stand-alone system for use with SystemLock
- Adding a system to a user group
- Carrying out administrator functions
- Remote Access Enabling – F4
- Switch on the device using SystemLock
- Start BIOS Setup F2
- Changing PIN
- Uninstall SystemLock
- Error messages
- Trusted Platform Module - TPM (dependent on configuration)
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The notebook's date or time is incorrect
- Battery indicator does not illuminate
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- User and/or supervisor SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the contents of the hard disk under Windows
- Technical data
- Manufacturer’s notes
- Index
Troubleshooting and tips
Error messages on the screen
Errormessages onthescr eenErrormessage:
This section describes the error messages generated by the BIOS Set up. Error messages displayed
by the operating system or programmes are described in the relevant documentation.
If the error message appears repeatedly, des pite troubleshooting measures, please
contact the place of purchase or o ur customer service centre.
Error message/cause Resolution
CMOS battery bad
If the error message occurs repeatedly, the
buffer battery in the notebook is flat.
► Contact your sales outlet
or our cust omer
service centre.
System CMOS checksum bad - default configuration
used
The system configuration information is
incorrect.
► Switch the notebook of
f.
► Switch the notebook on.
► Pre ss the function k
ey
F2
to access the
BIOS Setup.
► In the BIOS Setup , select the Exit menu.
► Select the entry Lo
ad Setup Defaults.
► Select OK and press the Enter key.
Extended memory failed at offset: xxxx Failing Bits:
zzzz zzzz
When testing the extended memory an error has
resulted at the address x xxx.
► Check whether the additional memory
module has been inserted correctly.
Failure Fixed Disk n
The settings of the hard disk drive are incorrect.
► Start the BIOS Setup (P ri m ary Master
submenu) and select the correct settings.
Keyboard controller error
► Switch the notebook off using with the
ON/OFF switch.
► Wait 3 - 5 seconds and switch on the
notebook again.
Keyboard error
If you are using an external keyboard:
► Ch eck the connection and reboot the
notebook.
nn Stuck key
► Make sure that no key is pressed.
Operating system not found
► Check
in the BIOS Setup whether your hard
disk h
as been set correctly.
► Make sure that the operating system is
installed on the corresponding drive.
Press <F1> to resume, <F2> to SETUP
This error message appears if an error occurs
during the self-test before starting the operating
system.
► Press the
F1
function k ey to start the
operating system.
► Pre ss the function key
F2
to access the
BIOS Setup.
110 Fujitsu