User manual
Table Of Contents
- FUJITSU LIFEBOOK T726
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Opening the notebook
- Switching on the notebook
- Different ways to use your notebook
- Switching off the notebook
- Closing the notebook
- Handwriting recognition
- LCD screen
- Using the device as a Tablet PC
- Using the device as a notebook
- Keyboard
- Tablet buttons
- Camera (dependent on configuration)
- Rechargeable battery
- Module
- Optical drive
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card
- Wireless LAN€/ Bluetooth€/ UMTS€/ LTE wireless components (dependent on configuration)
- Ethernet and LAN
- Your Port Replicator (optional)
- Security functions
- Brief overview of security functions
- Configuring the fingerprint sensor
- Using the Security Lock
- Configuring password protection in BIOS Setup Utility
- SmartCard reader
- SmartCard SystemLock (dependent on configuration)
- Access rights of SmartCards
- SmartCard user groups
- Installing SystemLock
- Setting up the first system in a user group or a stand-alone system for use with SystemLock
- Adding a system to a user group
- Carrying out administrator functions
- Remote Access Enabling – F4
- Switch on the device using SystemLock
- Start BIOS Setup F2
- Changing PIN
- Uninstall SystemLock
- Error messages
- Trusted Platform Module - TPM (dependent on configuration)
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The notebook's date or time is incorrect
- Battery indicator does not illuminate
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- User and/or supervisor SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the contents of the hard disk under Windows
- Technical data
- Manufacturer’s notes
- Index
Removing and installing components
during servicing
Attaching the cover
2
1
3
► Place the cover in the correct mounting position (1).
► Slide the cover in the direction of the arrow (2).
► Tighten the screw (3).
Finishing component removal
After you have removed or changed the system components as you required, please
prepare y our device for operation again as follows:
► Install the battery again (see "
Inserting battery", Page 46).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you d isco nnected before.
Fujitsu 99