Photo Scanner User Manual
Table Of Contents
- fi-4860C Operator's Guide
- INTRODUCTION
- CONTENTS
- 1 BASIC SCANNER OPERATIONS
- 2 SCANNING VARIOUS TYPES OF DOCUMENTS
- 3 DAIRY CARE
- 4 REPLACEMENT OF CONSUMABLES
- 5 SOLVING COMMON PROBLEMS
- 6 ADF DOCUMENT SPECIFICATIONS
- 7 SETUP MODE
- 8 OPTIONS
- 9 SCANNER SPECIFICATIONS
- Appendix 1 Drop-Out Color
- Appendix 2 Double-feed Detection Conditions
- Appendix 3 Messages of Operator Panel
32
2.3 Removing a Color from Scanned Image (dropout color)
2.3 Removing a Color from Scanned
Image (dropout color)
A selected color information (primary colors: red, green, blue) can be excluded (dropped out)
from the scanned image data.
For example, if the document contains black texts in green frames, you can set the scanner to get
only the texts and eliminate the green frames.
To drop out a color, change the setting in the [TWAIN Driver] dialog box and scan.
The following shows how to change the setting of [TWAIN Driver ] dialog box.
1. Click [[Advance] button in the [TWAIN Driver] dialog box.
The [Advance] dialog box appears.