Photo Scanner User Manual
Table Of Contents
- fi-4860C Operator's Guide
- INTRODUCTION
- CONTENTS
- 1 BASIC SCANNER OPERATIONS
- 2 SCANNING VARIOUS TYPES OF DOCUMENTS
- 3 DAIRY CARE
- 4 REPLACEMENT OF CONSUMABLES
- 5 SOLVING COMMON PROBLEMS
- 6 ADF DOCUMENT SPECIFICATIONS
- 7 SETUP MODE
- 8 OPTIONS
- 9 SCANNER SPECIFICATIONS
- Appendix 1 Drop-Out Color
- Appendix 2 Double-feed Detection Conditions
- Appendix 3 Messages of Operator Panel
● AP-11
<Hopper is full or
Pick unit not set>
The following message is displayed, when the Pick roller unit is
not set correctly or when there are too many documents.
(When the documents are on the hopper.)
<Pick unit not set> The following message is displayed, when the Pick roller unit is
not set correctly.
(When the documents are not exist on the hopper.)
<Pick unit not set> The following message is displayed, when the Pick roller unit is
not set correctly during scanning.
<Break roller not
set>
The following message is displayed, when scanning while the
Break roller unit is not set correctly.
<Separation roller > The following message is displayed, when rotating the Separa-
tion roller and the Brake roller does not rotate at all.
H
preo
po
ervo
ad
l
otn
ets
P
croi
k
l
erlu
ni
t
P
croi
k
l
erlu
ni
t
e
otn
ets
Bak
r
ore
r
l
l
p
Sar
e
a
iotn
l
oerr
l
orwn