Photo Scanner User Manual
Table Of Contents
- fi-4860C Operator's Guide
- INTRODUCTION
- CONTENTS
- 1 BASIC SCANNER OPERATIONS
- 2 SCANNING VARIOUS TYPES OF DOCUMENTS
- 3 DAIRY CARE
- 4 REPLACEMENT OF CONSUMABLES
- 5 SOLVING COMMON PROBLEMS
- 6 ADF DOCUMENT SPECIFICATIONS
- 7 SETUP MODE
- 8 OPTIONS
- 9 SCANNER SPECIFICATIONS
- Appendix 1 Drop-Out Color
- Appendix 2 Double-feed Detection Conditions
- Appendix 3 Messages of Operator Panel
● AP-10
<Double feed error>
(by thickness check)
The following message is displayed, when the double feed is
detectied by thickness check.
(by length check) The following message is displayed, when the double feed is
detectied by length check.
<Miss pick> The following message is displayed, when a document is not
sent from the hopper to the ADF.
<Pick over run> The following message is displayed, when a document is sent
from the hopper to the ADF and it goes into too much than the
normal position.
<Skew error> The following message is displayed, When skewed document is
fed from the hopper to the ADF.
D
uelo
b
F
ede
L
nhte
g
e
rorr
M-s
i
p
cki
P
i
k
ov
c
erunr
I
rulgr
e
a
prp
er
a