Photo Scanner User Manual
Table Of Contents
- fi-4860C Operator's Guide
- INTRODUCTION
- CONTENTS
- 1 BASIC SCANNER OPERATIONS
- 2 SCANNING VARIOUS TYPES OF DOCUMENTS
- 3 DAIRY CARE
- 4 REPLACEMENT OF CONSUMABLES
- 5 SOLVING COMMON PROBLEMS
- 6 ADF DOCUMENT SPECIFICATIONS
- 7 SETUP MODE
- 8 OPTIONS
- 9 SCANNER SPECIFICATIONS
- Appendix 1 Drop-Out Color
- Appendix 2 Double-feed Detection Conditions
- Appendix 3 Messages of Operator Panel

● AP-9
■ Error mesage (Temporary error)
<Hopper empty> The following messages are displayed if no documents are on
the hopper during the scanning opperation. Please place docu-
ments on the hopper. Scanning is continued, when placing doc-
uments on the hopper for re-scanning.
To clear this message, press the [Stop] button.
(at Double feed)
HINT
"xxxx" shows the number of Batch counter value.
<Paper Jam> The following message displayed if a document is jammed in the
ADF.
Refer to “Operator guide” included in “User manual CD-ROM”
for removing the document remained in the scanner.
HINT
One of "1" - "8" is displayed instead of "x", depending
on paper jam status.
<ADF cover open> The following message is displayed if the ADF cover is not
closed completely.
Close the ADF cover completely, to enable scanning.
per E
xxxx
m
p
x
Pa
ty
D
u
e
l
ob
F
edex
xx
x
x
pe
rEmp
Pa
t
y
per Ja
m
Pa
x
F- C
o
ver p
enAD
O