Photo Scanner User Manual
Table Of Contents
- fi-4860C Operator's Guide
- INTRODUCTION
- CONTENTS
- 1 BASIC SCANNER OPERATIONS
- 2 SCANNING VARIOUS TYPES OF DOCUMENTS
- 3 DAIRY CARE
- 4 REPLACEMENT OF CONSUMABLES
- 5 SOLVING COMMON PROBLEMS
- 6 ADF DOCUMENT SPECIFICATIONS
- 7 SETUP MODE
- 8 OPTIONS
- 9 SCANNER SPECIFICATIONS
- Appendix 1 Drop-Out Color
- Appendix 2 Double-feed Detection Conditions
- Appendix 3 Messages of Operator Panel
226
7.5 Test Mode Details
(4) At <Screen51-2>, select the right most item, [200] in the sample screen, and press
(Enter button). Then the LCD display shows <Screen51-2.4>.
<Screen51-2.4>
At this screen, press (Left arrow button) or (Right arrow button)
and select scan resolution. Following parameters can be specified.
Press (Enter button) and confirm the setting. Then <Screen51-2> is
redisplayed.
(5) Press (Enter button). Then <Screen51-1> is redisplayed.
At <Screen51-1>, select [START] and press (Start button).
If fi-486PRFR and/or fi-486PRREis installed, <Screen51-3> is displayed for you to
setup imprinter test conditions.
If an imprinter(s) is not installed, the scanner starts scanning operations.
<Screen51-3>
200: Scan at 200 dpi
240: Scan at 240 dpi
300: Scan at 300 dpi
400 sheets: Scan at 400 dpi
2
0
E
OS
L
U
O
T
I
N
R
0
e
O
=f/fO:Pn
r
n
rPi
t
o
/stP