Photo Scanner User Manual
Table Of Contents
- fi-4860C Operator's Guide
- INTRODUCTION
- CONTENTS
- 1 BASIC SCANNER OPERATIONS
- 2 SCANNING VARIOUS TYPES OF DOCUMENTS
- 3 DAIRY CARE
- 4 REPLACEMENT OF CONSUMABLES
- 5 SOLVING COMMON PROBLEMS
- 6 ADF DOCUMENT SPECIFICATIONS
- 7 SETUP MODE
- 8 OPTIONS
- 9 SCANNER SPECIFICATIONS
- Appendix 1 Drop-Out Color
- Appendix 2 Double-feed Detection Conditions
- Appendix 3 Messages of Operator Panel
213
7.4 Test Mode Overview
7
SETUP MODE
7.4 Test Mode Overview
■ Outline
Scanner operation can be checked in offline test mode.
To enter the test mode, follow the procedures below.
- Test mode
Keep pressing (Start button) and turn on the power.
Then the operator panel LCD displays the following message.
Press (Left arrow button) or (Right arrow button) and select [Reset].
By pressing (Enter button), the scanner enters test mode.
To end the test mode, turn off the power.
HINT
The blinking item is the one selected.
E
DOSEL
E
<M CE
SET TSU
P
>
T
T