Photo Scanner User Manual

211
7.3 Setup Mode Details
7
SETUP MODE
28. Setting Brightness
1) Press (Next button) or (Previous button) and let LCD display <Screen28>.
<Screen28>
2) At <Screen28>, to adjust the Brightness, press (Right arrow button) and select
[Yes].
Press (Enter button) to confirm the selection. <Screen28-1> is displayed.
If Brightness adjustment is not required, select [No] and press (Enter button).
<Screen28-1>
3) At <Screen28-1>, to adjust the front-side brightness, press (Left arrow button)
and select [Front].
If back side needs brightness adjustment, press (Right arrow button) and select
[Back].
If the brightness needs to be increased, press (Next button). Each time the button
is pressed the brightness value increases by 1.
If the brightness needs to be decreased, press (Previous button). Each time the
button is pressed, the brightness decreased by 1.
4) Press (Enter button) and make the setting valid.
Press (EXIT button) at <Screen28-1> then the LCD display changes to
<Screen28>.
Press (EXIT button) at <Screen28> and the LCD display goes back to [Ready]
screen.
HINT
The blinking item is the one selected.
2
8
r
h
B
e!
t
ig n
gCn
h
a
/YesN?oe
ss
2
8
r
h
B
e!
t
ig n
tFn
r
o
c
k: 0B0a:
ss-1