Photo Scanner User Manual
Table Of Contents
- fi-4860C Operator's Guide
- INTRODUCTION
- CONTENTS
- 1 BASIC SCANNER OPERATIONS
- 2 SCANNING VARIOUS TYPES OF DOCUMENTS
- 3 DAIRY CARE
- 4 REPLACEMENT OF CONSUMABLES
- 5 SOLVING COMMON PROBLEMS
- 6 ADF DOCUMENT SPECIFICATIONS
- 7 SETUP MODE
- 8 OPTIONS
- 9 SCANNER SPECIFICATIONS
- Appendix 1 Drop-Out Color
- Appendix 2 Double-feed Detection Conditions
- Appendix 3 Messages of Operator Panel
194
7.3 Setup Mode Details
4) At <Screen16-2>, specify the number of pick retries. By pressing (Left arrow
button), the number of retries decreases. By pressing (Right arrow button), the
number of retries increases.
Press (Left arrow button) or (Right arrow button), and select the setting.
The number of the pick retries can be set between 1 to 7 times.
5) Press (Enter button) and make the setting valid.
Press (EXIT button) at <Screen16-1> or <Screen16-2>, then the LCD display
changes to <Screen16>.
Press (EXIT button) again and the LCD display goes back to [Ready] screen.