Photo Scanner User Manual
Table Of Contents
- fi-4860C Operator's Guide
- INTRODUCTION
- CONTENTS
- 1 BASIC SCANNER OPERATIONS
- 2 SCANNING VARIOUS TYPES OF DOCUMENTS
- 3 DAIRY CARE
- 4 REPLACEMENT OF CONSUMABLES
- 5 SOLVING COMMON PROBLEMS
- 6 ADF DOCUMENT SPECIFICATIONS
- 7 SETUP MODE
- 8 OPTIONS
- 9 SCANNER SPECIFICATIONS
- Appendix 1 Drop-Out Color
- Appendix 2 Double-feed Detection Conditions
- Appendix 3 Messages of Operator Panel
171
7.3 Setup Mode Details
7
SETUP MODE
2. Setting Pre-pick
1) Press (Next button) or (Previous button) and let the scanner show <Screen2>.
<Screen2>
2) At <Screen2>, to enable Pre-pick, press (Left arrow button) and select [On].
To disable Pre-pick, press (Right arrow button) and select [Off].
3) Press (Enter button) and make the setting valid.
Press (EXIT button) at the end and the LCD display goes back to [Ready] screen.
02
-ce
!
k
pi
=
P
r
ffO/
n
O