Photo Scanner User Manual
Table Of Contents
- fi-4860C Operator's Guide
- INTRODUCTION
- CONTENTS
- 1 BASIC SCANNER OPERATIONS
- 2 SCANNING VARIOUS TYPES OF DOCUMENTS
- 3 DAIRY CARE
- 4 REPLACEMENT OF CONSUMABLES
- 5 SOLVING COMMON PROBLEMS
- 6 ADF DOCUMENT SPECIFICATIONS
- 7 SETUP MODE
- 8 OPTIONS
- 9 SCANNER SPECIFICATIONS
- Appendix 1 Drop-Out Color
- Appendix 2 Double-feed Detection Conditions
- Appendix 3 Messages of Operator Panel
105
4.7 Replacing the Back-side Lamp
4
REPLACEMENT OF CONSUMABLES
5. Install the Back-lamp unit in the reverse order of its removal. Make sure the
connectors meet properly.
6. Close the side cover. Confirm that the cover is closed securely.
7. Clear the Rear-side lamp counter.
Please refer to the section “7.3 Setup Mode Details,” “9. Abrasion counter reset.”
3
HINT
You can check the cumulative lamp on hours
from the operator panel Test mode.
For the details, refer to the section "7.5 Test
Mode Details," "3.Display the cumulative lamp-
on hours."