Photo Scanner User Manual
Table Of Contents
- fi-4860C Operator's Guide
- INTRODUCTION
- CONTENTS
- 1 BASIC SCANNER OPERATIONS
- 2 SCANNING VARIOUS TYPES OF DOCUMENTS
- 3 DAIRY CARE
- 4 REPLACEMENT OF CONSUMABLES
- 5 SOLVING COMMON PROBLEMS
- 6 ADF DOCUMENT SPECIFICATIONS
- 7 SETUP MODE
- 8 OPTIONS
- 9 SCANNER SPECIFICATIONS
- Appendix 1 Drop-Out Color
- Appendix 2 Double-feed Detection Conditions
- Appendix 3 Messages of Operator Panel
81
3.8 Cleaning the Lamps
3
DAIRY CARE
5. Install the Back-lamp unit in the reverse order of its removal. Make sure that the
clear portion of the Lamp faces up.
6. Install the Back-lamp in the reverse order of its removal. Make sure the connectors
meet properly.
7. Close the side cover. Confirm that the cover is closed securely.
HINT
If the Lamp is installed with the clear portion
facing upward, an error due to insufficient light
occurs.