Installation Manual

IntesisHome
®
IS-IR-WIFI-1 User Manual r1.2 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisHome
®
is a registered trademark
of Intesis Software SL
URL
Contact
http://www.intesishome.com
http://www.intesishome.com/contact
22 / 23
10 LED status summary
According to the different stages where the device can work in, please find below the LED
status summary for your guidance.
10.1 LED status during Wi-Fi configuration
LED Color (s)
Behavior
Description
Blue
Blinking
Performing WPS connection (up to 2 min)
Magenta
Blink
WPS connection error
White
Blinking
Identifying IntesisHome Device
Green
Steady
Not configured
Green
Blinking
Checking device configuration parameter values(up to 2 min)
Red
Blinking
Connecting to access point and server (up to 2 min)
Yellow
Blinking
Downloading configuration. Wait (up to 2 min)
Red - Green
Alternate blinking
Error Connecting to Access point or router. Try to connect
again and make sure you write the correct password.
Yellow - Green
Alternate blinking
Server not reached. Check if there is Internet connectivity on
your Access Point or router.
10.2 LED status during IR configuration (learning mode)
LED Color
Behavior
Description
White
Steady
Waiting customer pressing the On/Off button of the IR remote controller (up
to 20 seconds)
Green
Blinking
The IR remote controller has been linked as expected with the IntesisHome
device
Red
Blinking
The IR remote controller has NOT been linked as expected with the
IntesisHome device
10.3 LED status during working mode
LED Color
Behavior
Description
Off
IntesisHome device not powered or IntesisHome device working and the AC
unit is Off.
Blue
Steady
Indoor Unit ON working in Cool or Dry mode
Red
Indoor Unit ON working in Heat mode
Green
Indoor Unit ON working in Fan mode
Yellow
Indoor Unit ON working in Auto mode
Blue
3 blinks
Command received or sent during Cool or Dry mode
Red
Command received or sent during Heat mode
Green
Command received or sent during Fan mode
Yellow
Command received or sent during Auto mode