Installation Manual

IntesisHome

IS-IR-WIFI-1 User Manual r1.2 eng

This information is subject to change without notice

IntesisHome

is a registered trademark

of Intesis Software SL

URL

Contact

http://www.intesishome.com

http://www.intesishome.com/contact

19 / 23

8 Operation modes

The IntesisHome device can be operated in two different ways: standard operation (from the

App or Web Interface) or back up operation (using the IH button).

8.1 Standard operation: App and web control of the AC unit.

This is the standard way to control the AC unit. Using our App or the control web interface, you

will be able to control the AC unit in the same way you would do it using the IR remote

controller.

Turns the unit On/Off Shows the ambient Sets the desired Sets the mode

temperature set point temperature

Sets the fan speed Sets the left/right Sets the up/down

vanes position vanes position

IMPORTANT: The ambient temperature is provided by an internal sensor located inside the

IntesisHome device. Values provided by the IntesisHome device sensor may be used only as

an estimation of the real ambient temperature not as a real measurement of the ambient

temperature.

NOTE: Some of the widgets may not be present depending on the features of your AC unit.

Please check your AC unit manual to get more information about the available features (fan

speeds, left/right vanes, up/down vanes, modes and temperature ranges).