CONTENTS Introduction fi-5750C Image Scanner Operator's Guide 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix All Rights Reserved, Copyright (C) PFU LIMITED 2003 P3PC-E747-01EN
CONTENTS Introduction Introduction Regulatory Information Trademarks Thank you for purchasing the fi-5750C Image Scanner. The fi-5750C is a high-performance Duplex Color scanner product, equipped with ADF (Automatic Document Feeder) for automatically scanning documents and Flatbed for manual scanning. Note, Liability Preface Features: ● Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION ● ● ● 180-degree rotatable ADF - you can set documents from various directions.
CONTENTS MAP Introduction Regulatory Information Trademarks Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATION 2.2 Setting the ADF 2.3 Loading documents onto the 2.4 Scanning document using 2.5 Scanning documents ADF the Flatbed 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.6 Skipping blank pages 3.
CONTENTS Regulatory Information Introduction Regulatory Information FCC declaration Trademarks This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CONTENTS Regulatory Information (Continued from the previous page) Introduction Regulatory Information Canadian DOC Regulations Trademarks This digital apparatus does not exceed the Class B limit for radio noise emission from digital apparatus set out in the Radio interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003.
CONTENTS Regulatory Information (Continued from the previous page) Introduction Regulatory Information International ENERGY STAR® Program Trademarks As an ENERGY STAR® Partner, PFU LIMITED has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
CONTENTS Regulatory Information (Continued from the previous page) Introduction Regulatory Information Use in High-safety Applications Trademarks 1 NAMES AND FUNCTIONS OF PARTS This product has been designed and manufactured on the assumption that it will be used in office, personal, domestic, regular industrial, and general-purpose applications.
CONTENTS Trademarks Introduction Regulatory Information Use in High-safety Applications Trademarks Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. Adobe, the Adobe logo, and Acrobat are either registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.
CONTENTS Trademarks (Continued from the previous page) Introduction Regulatory Information Manufacturer Trademarks PFU LIMITED Note, Liability International Sales Dept.
CONTENTS Note, Liability Introduction Regulatory Information READ ALL OF THIS MANUAL CAREFULLY BEFORE USING THIS PRODUCT. IF THIS PRODUCT IS NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE CAUSED TO USERS OR BYSTANDERS.
CONTENTS Preface Introduction Regulatory Information Safety Precautions Trademarks Note, Liability This manual describes important details for ensuring the safe and correct use of this product. Thoroughly read this manual before you start to use this product. In particular, be sure to read and fully understand the Safety Precautions described in this manual before you use this product. Preface Also, store this manual in a safe place so that it can be easily referred to during use of this product.
CONTENTS Preface (Continued from the previous page) Introduction Regulatory Information Symbols Used In This Manual Trademarks This manual uses the following symbols in explanations in addition to warning indications. Note, Liability ATTENTION Preface This symbol alerts operators to particularly important information. Be sure to read this information. Safety Precautions HINT 1 NAMES AND FUNCTIONS OF PARTS This symbol alerts operators to helpful advice regarding operation.
CONTENTS Preface (Continued from the previous page) Introduction Regulatory Information Screen Examples In This Manual Trademarks The screen examples in this manual are subject to change without notice in the interest of product improvement. Note, Liability If the actual displayed screen differs from the screen examples in this manual, operate by following the actual displayed screen while referring to the User's Manual of the scanner application you are using.
CONTENTS Safety Precautions Introduction Regulatory Information WARNING Trademarks The following describes important warnings described in this manual. Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS Do not touch the AC cable with wet hands. Do not touch the power plug with wet hands. Doing so might cause electric shock. Do not damage the AC cable.
CONTENTS Safety Precautions (Continued from the previous page) Introduction Regulatory Information WARNING Trademarks The following describes important warnings described in this manual. Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS Do not install the scanner in locations subject to oil smoke, steam, humidity, and dust. Doing so might cause a fire or electric shock. Do not use the scanner if you smell strange odor.
CONTENTS Safety Precautions (Continued from the previous page) Introduction Regulatory Information CAUTION Trademarks The following describes important cautions described in this manual. Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS Do not install the scanner on unstable surfaces. Install the scanner on a desk so that none of its parts protrude outside of the desktop. Also, make sure that the scanner is installed on a flat, level surface.
CONTENTS Safety Precautions (Continued from the previous page) Introduction Regulatory Information CAUTION Trademarks The following describes important cautions described in this manual. Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE Protect the scanner from static electricity. Install the scanner away from strong magnetic fields and other sources of electronic noise.
CONTENTS Safety Precautions (Continued from the previous page) Introduction Regulatory Information CAUTION Trademarks The following describes important cautions described in this manual. Note, Liability Preface Safety Precautions 1 NAMES AND FUNCTIONS OF PARTS Do not try to move or lift the scanner alone. This scanner is heavy (77.2lbs/35kg). When you carry the scanner, ensure that additional personnel are used. Before moving the scanner, make sure the shipping lock and ADF lock screws are locked.
CONTENTS Chapter 1 NAMES AND FUNCTIONS OF PARTS Introduction 1 NAMES AND FUNCTIONS OF PARTS This chapter describes names and functions of parts. 1.1 Names and functions of parts 1.
CONTENTS 1.1 NAMES AND FUNCTIONS OF PARTS Introduction 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix No. Name Function 1 Document cover When closed, this cover fixes the document set on the reading position.
CONTENTS 1.1 NAMES AND FUNCTIONS OF PARTS (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix No. Name Function 7 Operator Panel This panel consists of a Function No.
CONTENTS 1.1 NAMES AND FUNCTIONS OF PARTS (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS No. Name Function Appendix 13 EXT connector Connector port for optional units.
CONTENTS 1.1 NAMES AND FUNCTIONS OF PARTS (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS No. Name No.
CONTENTS 1.2 Functions of the operator panel Introduction 1 NAMES AND FUNCTIONS OF PARTS 1.1 Names and functions of parts 1.2 Functions of the operator panel 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix Name Function Function No. display Indicates the function No. and error status.
CONTENTS Chapter 2 BASIC SCANNER OPERATION Introduction 1 NAMES AND FUNCTIONS OF PARTS This chapter describes how to scan various types of documents. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
CONTENTS 2.1 Turning the scanner ON/OFF Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION When "|" of the power switch is pressed, the scanner is turned ON, and the green LED on the operator panel lights. During the initialization, the indication of the Function No. display changes as follows: "8" > "P" > "0" > "1" The indication "1" means that the operator panel is in the ready status. When turning off the scanner, press the "0" side of the power switch. 2.
CONTENTS 2.1 Turning the scanner ON/OFF (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS Power Save Mode 2 BASIC SCANNER OPERATION The Power Save mode keeps the scanner in a low-powered state if no operation is performed on the scanner for 15 minutes when it is ON. The scanner is automatically switched to the Power Save mode. 2.1 Turning the scanner ON/OFF In the Power Save mode, the indication of the Function No.
CONTENTS 2.2 Setting the ADF Introduction 1 NAMES AND FUNCTIONS OF PARTS Follow the procedure below to set or change the position of the ADF. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
CONTENTS 2.3Loading documents onto the ADF Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 1. Confirm the following items before loading documents ❍ All the documents have the same width ❍ Check the number of sheets in the document stack. The standard of number of sheets that can be loaded on the scanner is as follows: 2.2 Setting the ADF A4-size paper or smaller: 20 mm or less. 2.3 Loading documents onto the ADF Note: 200 sheets at in 80g/m2. 2.
CONTENTS 2.3 Loading documents onto the ADF (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2. Fan the documents 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
CONTENTS 2.3 Loading documents onto the ADF (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 3. Load the documents onto the ADF paper chute. Pull out the ADF paper chute extension according to the length of the document. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
CONTENTS 2.3 Loading documents onto the ADF (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 4. Adjust the side guides to the width of the documents. Move the side guides so that they contact both sides of the documents. If there is any space between the side guides and the edges of documents, the scanned image may be skewed. Set the documents face-down onto the ADF paper chute (so that the side to be scanned faces towards the ADF paper chute). 2.
CONTENTS 2.3 Loading documents onto the ADF (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 5. Adjust the stacker extension according to the document size and raise the stopper. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
CONTENTS 2.3 Loading documents onto the ADF (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 6. With the movie below, review how to load the document onto the ADF: 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
CONTENTS 2.4 Scanning document using the Flatbed Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 1. Open the document cover holding its handle. ATTENTION Confirm that there is no document on the ADF paper chute and the stacker. 2. Place the document face-down onto the document bed adjusting it to the reference lines. 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
CONTENTS 2.5 Scanning documents Introduction 1 NAMES AND FUNCTIONS OF PARTS 1. Load documents onto the ADF paper chute. Pull out the ADF paper chute extension according to the length of the document. For details on how to load documents, refer to "2.3 Loading documents onto the ADF". 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2. Start ScandAll 21. Select [ Start ] - [ Program ] - [Scanner Utility for Microsoft Windows] and click [ScandAll 21]. 2.2 Setting the ADF 2.
CONTENTS 2.5 Scanning documents (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 4. Click the [Scan To View] button on the tool bar. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF The [TWAIN Driver] dialog box (for setting the scan conditions) appears. 2.4 Scanning document using the Flatbed 2.5 Scanning documents 5. Set the scan resolution, paper size, etc., and click the [Scan] button.
CONTENTS 2.5 Scanning documents (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS The images of scanned documents are displayed on the [ScandAll 21] window. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver Introduction 1 NAMES AND FUNCTIONS OF PARTS 2.6.1 FUJITSU TWAIN32 Scanner Driver 2 BASIC SCANNER OPERATION FUJITSU TWAIN32 Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application software that complies with the TWAIN standard. 2.1 Turning the scanner ON/OFF The following describes the procedure with examples of ScandAll 21 for ordinary scanning by using this driver software. 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 1. Procedure for Basic Scanning Operation 1. Start up the application. From the [Start] menu, select [Programs]-[Scanner Utility for Microsoft Window] and click [ScandAll 21]. 2. Select your scanner on the window below. Select [Select Source] from the [Scan] menu. 2.3 Loading documents onto the ADF 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 3. Select the scanner to use, then click the [Select] button. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 4. Load the documents on the scanner. For details on loading documents, refer to "2.3 Loading Documents onto the ADF". 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 5. Open the TWAIN Driver window. Select [Scan To View] from the [Scan] menu. 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF [TWAIN Driver] dialog box appears. 2.3 Loading documents onto the ADF 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 6. Configure settings for scanning and click the [Scan] button. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS >>The images of scanned documents are displayed on the [ScandAll 21] window. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2. Setting Window for FUJITSU TWAIN32 Scanner Driver 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS Resolution 2 BASIC SCANNER OPERATION Specifies the resolution of scanning. It can be specified by selecting a default value from the list or customizing (specify any resolution in 1 dpi unit). By marking the [Predefine] check box, you can select one from three predefined settings as [Normal], [Fine], [Super Fine] to scan documents instead of setting details by yourself.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS Image Mode 2 BASIC SCANNER OPERATION Specifies the image type for the scanned documents. 2.1 Turning the scanner ON/OFF ● Black & White Documents are scanned in binary (black and white). 2.2 Setting the ADF ● 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed ● 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS [Help] button 2 BASIC SCANNER OPERATION Opens the "FUJITSU TWAIN32 Scanner Driver Help" window. The window also opens by pushing the [F1] key. 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF [About...] button 2.3 Loading documents onto the ADF Opens an information window about the FUJITSU TWAIN32 Scanner Driver's version. 2.4 Scanning document using the Flatbed 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS [Rotation] tab 2 BASIC SCANNER OPERATION Select this tab when setting image rotation, detection of document size, etc. 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF [Job/Cache] tab 2.3 Loading documents onto the ADF Select this tab when setting cache mode, job controls, double-feed detection, blank page skipping, etc. 2.4 Scanning document using the Flatbed 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS [Compression] tab 2 BASIC SCANNER OPERATION Select this tab for setting the compression rate of JPEG Transfer. 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF [Advance...] button 2.3 Loading documents onto the ADF Click this button for settings of the advanced image processing. You can set Edge Extract, Gamma Pattern, White Level Follower, Dropout Color, Reverse, etc. 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2.6.2 FUJITSU ISIS Scanner Driver 2 BASIC SCANNER OPERATION FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application software that complies with The ISIS standard. The following describes the procedure with examples of QuickScan for ordinary scanning by using this driver software. 2.1 Turning the scanner ON/OFF 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 3. Select [fi-5750C], then click the [OK] button. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.6 How to use the Scanner Driver 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 4. Select [Scan] - [New Batch] on the menu bar.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 5. Select the profile for scanning. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 6. Select the [Scan] tab and click the [Scanner Settings] on the [Profile Editor] window. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 7. Configure settings for scanning and click the [OK] button. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 8. The [Profile Editor] window appears. Click the [OK] button to return to [New batch] dialog. ATTENTION Configure other settings of the profile, if necessary. Refer to the "QuickScan Overview" or the "QuickScan Help" for further information on functions and operations of QuickScan.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 10. Click the [Scan] button. 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2. Configuration Window of FUJITSU ISIS Scanner Driver 2 BASIC SCANNER OPERATION 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS Image Mode 2 BASIC SCANNER OPERATION Select a color mode suitable for the purpose from the menu. 2.1 Turning the scanner ON/OFF ● 2.2 Setting the ADF 2.3 Loading documents onto the ADF ● 2.4 Scanning document using the Flatbed 2.5 Scanning documents ● 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS Half tone 2 BASIC SCANNER OPERATION Select the half tone pattern for half tone scanning. This setting is available when "Black & White" is selected in the "Image Mode". 2.1 Turning the scanner ON/OFF Dither Pattern 0 2.2 Setting the ADF This setting is suitable for scanning dark photographs. 2.3 Loading documents onto the ADF Dither Pattern 1 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS Contrast 2 BASIC SCANNER OPERATION Sets the contrast between light and shadow of the scanned image. Specify the contrast as a number within the range of 1 (low [soft]) to 255 (high [sharp]). Increasing this value makes the contrast sharper. 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF Scan Type 2.3 Loading documents onto the ADF Selects the scanning method. 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS Paper Size 2 BASIC SCANNER OPERATION Selects a paper size according to the size of the document to be scanned. Select a standard paper size from the list. 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF Paper Layout 2.3 Loading documents onto the ADF Specifies orientation of the documents as portrait or landscape. 2.4 Scanning document using the Flatbed 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS [Area...] button 2 BASIC SCANNER OPERATION Opens the Scan Area dialog box. Specify scan area for the document size. The size can be set by dragging the frame with mouse. Otherwise, enter any value for the setting. 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS [JEPG...] button 2 BASIC SCANNER OPERATION Opens the JPEG Settings dialog box. Used for setting the compression rate of JPEG transfer. 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.3 Loading documents onto the ADF 2.4 Scanning document using the Flatbed 2.5 Scanning documents 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS [Setup IPC...] button 2 BASIC SCANNER OPERATION This button displays the Image Processing dialog. This button is enabled when Image Processing Software Option (separately sold) is installed and "Image Processing" is selected in the "Image Mode". Refer to the documentation provided with Image Processing Software Option. 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS Overscan 2 BASIC SCANNER OPERATION This option specifies the overscan function. This function makes the scanned images larger than the original documents by adding margins. 2.1 Turning the scanner ON/OFF 2.2 Setting the ADF Gamma 2.3 Loading documents onto the ADF Specifies Gamma correction. Correction patterns are: "Normal", "Soft", "Sharp", "Custom", or "Download". 2.
• CONTENTS 2.6 How to use the Scanner Driver (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS Dropout Color 2 BASIC SCANNER OPERATION This option excludes selected color (the three primary colors of light i.e. green, red, blue) from scanned images. For example, if the document contains black text in a red frame and when the red color is selected, the scanner reads only the text and eliminate (drop out) the red frame. 2.1 Turning the scanner ON/OFF 2.
CONTENTS Chapter 3 SCANNING VARIOUS TYPES OF DOCUMENTS Introduction 1 NAMES AND FUNCTIONS OF PARTS This chapter describes how to scan various types of documents with examples of TWAIN Driver. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.5 Selecting a color to drop out 3.6 Skipping blank pages 3.7 Detecting double-feeds 3.
CONTENTS 3.1 Scanning double sided documents Introduction 1 NAMES AND FUNCTIONS OF PARTS 1. Load documents onto the ADF paper chute. For details on how to load documents, refer to "2.3 Loading documents onto the ADF". 2 BASIC SCANNER OPERATION 2. Adjust the side guides to the width of the documents. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3. Start up ScandAll 21. At [ Start ] menu, select [Program] - [Scanner Utility for Microsoft Windows] - [ScandAll 21].
CONTENTS 3.1 Scanning double sided documents (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 5. Click [Scan To View] on the tool bar. The [TWAIN Driver] dialog box appears. 6. Select [ADF (Duplex)] from [Scan Type]. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.
CONTENTS 3.1 Scanning double sided documents (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 7. Click the [Scan] button. For settings in the [TWAIN Driver] dialog box, refer to Chapter "2.6 How to use the Scanner Driver". 2 BASIC SCANNER OPERATION >> Scanned images are displayed in ScandAll21 window. 3 SCANNING VARIOUS TYPES OF DOCUMENTS HINT 3.1 Scanning double sided documents ● For details on ScandAll 21, refer to [ScandAll 21 Help].
CONTENTS 3.2 Scanning documents with different widths Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS When you scan a batch of documents with different widths by using the ADF, you may get skewed images from smaller sized documents. Be sure to scan only documents of the same width together. To prevent skewed images, enable [Automatic Size and Skew Detection] function. For details on this function, refer to "3.8 Correcting skewed documents". 1.
CONTENTS 3.3 Scanning document longer than A3 size Introduction 1 NAMES AND FUNCTIONS OF PARTS 1. Load the documents onto the ADF paper chute. For details on loading documents, refer to Chapter "2.3 Loading documents onto the ADF". 2 BASIC SCANNER OPERATION 2. Adjust the side guides to the document width. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3. Start ScandAll 21. At [ Start ] menu, select [Program] - [Scanner Utility for Microsoft Windows] - [ScandAll 21].
CONTENTS 3.4 Saving scanned images in PDF format Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths To save scanned images in PDF format, Adobe Acrobat 6.0 must be installed on your PC. Adobe Acrobat 6.0 can be installed from the provided Adobe Acrobat CD-ROM. There are two methods for saving scanned images in PDF format.
CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 3.4.1 Using ScandAll 21 2 BASIC SCANNER OPERATION 1. Load the documents on the ADF paper chute. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 2. Start up ScandAll 21. Select [Program] - [ScannerUtility for Microsoft Windows] - [ScandAll21] from the [Start] menu. This will start up the application. 3.1 Scanning double sided documents 3. From the [Scan] menu select [To Adobe PDF].
CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 4. Set the scan resolution, paper size, etc., and then click the [Scan] button. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.5 Selecting a color to drop out 3.6 Skipping blank pages 3.
CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 5. To end scanning, click the [Close] button. >> The scanned image is displayed. 6. Enter the file name and select the destination to save the scanned image. For details, refer to "ScandAll 21 Help". 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.
CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 3.4.2 Using Adobe Acrobat 6.0 2 BASIC SCANNER OPERATION 1. Load the documents on the ADF paper chute. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 2. Start up Adobe Acrobat 6.0 Select [Program] - [Adobe Acrobat 6.0] from the [Start] menu. This starts up Adobe Acrobat 6.0. 3.1 Scanning double sided documents 3. From the [File] menu select [Create PDF] - [From Scanner]. 3.
CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 4. Select [FUJITSU fi-5750Cdj] ([FUJITSU TWAIN 32] for WindowsNT 4.0) at [Device] and click the [Scan] button. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.5 Selecting a color to drop out 3.
CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 5. Select the scan resolution, document size, etc., and click the [Scan] button. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.5 Selecting a color to drop out 3.6 Skipping blank pages 3.
CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 6. To end scanning, click the [Done] button. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.5 Selecting a color to drop out >> The scanned image is displayed. 3.6 Skipping blank pages 3.
CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 7. Select [Save as...] or [Save] from the [File] menu to save the scanned image. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.5 Selecting a color to drop out 3.6 Skipping blank pages 3.
CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS HINT If you save scanned images by this procedure, the file size may increase greatly. For reducing the file size, follow the procedure below. (It may take much more time than the usual saving procedure.) 1. Select [File] - [Print...] 2. On the following dialog specify [Adobe PDF] for [Name]. 3.
CONTENTS 3.4 Saving scanned images in PDF format (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3. Click the [Properties] button. 4. Click the [Adobe PDF Settings] tab. 5. Select one from [Default Settings]. The following shows an example of [Standard]. 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.
CONTENTS 3.5 Selecting a color to drop out Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS A selected color (red, green, blue) can be removed (dropped out) from the scanned image data. For example, if the document contains black text in green frames, you can set the scanner to get only the text and eliminate the green frames. To drop out a color, change the setting in the driver setting dialog box. 1.
CONTENTS 3.5 Selecting a color to drop out (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2. Select the color to drop out from [Dropout Color] under [More]. For example, if the document contains black text in green frames, you can set the scanner to get only the text and eliminate the green frames. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.
CONTENTS 3.6 Skipping blank pages Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION Change settings in the [TWAIN Driver] dialog box for skipping blank pages at scanning documents. 1. Click [Option] button in the [TWAIN Driver] dialog box. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.5 Selecting a color to drop out 3.
CONTENTS 3.6 Skipping blank pages (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2. Click the [Job/Cache] tab. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.5 Selecting a color to drop out 3.6 Skipping blank pages 3.7 Detecting double-feeds 3.
CONTENTS 3.6 Skipping blank pages (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3. Check the [Blank Page Skip] box. 4. By using the slider control under [Blank Page Skip], specify the [Black Dots Ratio] or [White Dots Ratio] (ratio of black or white parts on the documents) for judging if the scanned documents are recognized as blank pages by the scanner.
CONTENTS 3.7 Detecting double-feeds Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS "Double-feed" is an error that occurs when two or more sheets are accidentally fed into the ADF at the same time. You can set the scanner to display an error message when it detects a double-feed. To set conditions for the double-feed detection, change the settings in the [TWAIN Driver] dialog box. 1. Click [Option] button in the [TWAIN Driver] dialog box. 3.
CONTENTS 3.7 Detecting double-feeds (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2. Click the [Job/Cache] tab. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.5 Selecting a color to drop out 3.6 Skipping blank pages 3.7 Detecting double-feeds 3.
CONTENTS 3.7 Detecting double-feeds (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 3. Select the detection conditions from [Double Feed Detection] under [ADF Option]. The following are the detection conditions 2 BASIC SCANNER OPERATION None Double-feed detection is not performed 3 SCANNING VARIOUS TYPES OF DOCUMENTS Check overlapping The scanner monitors the overlapping of documents.
CONTENTS 3.8 Correcting skewed documents Introduction 1 NAMES AND FUNCTIONS OF PARTS You can set the scanner so that skew of documents are detected and corrected automatically when skewed documents are fed into the ADF. 2 BASIC SCANNER OPERATION Change the setting in the [TWAIN Driver] dialog box to enable this function. The following shows the procedure for changing the setting in the dialog box: 3 SCANNING VARIOUS TYPES OF DOCUMENTS 1. Click [Option] button in the [TWAIN Driver] dialog box. 3.
CONTENTS 3.8 Correcting skewed documents (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 3. Select the [Automatic page size detection ] from the [Automatic Size and Skew Detection] menu. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 3.1 Scanning double sided documents 3.2 Scanning documents with different widths 3.3 Scanning document longer than A3 size 3.4 Saving scanned images in PDF format 3.5 Selecting a color to drop out 3.6 Skipping blank pages 3.
CONTENTS Chapter 4 DAILY CARE Introduction 1 NAMES AND FUNCTIONS OF PARTS This chapter describes how to clean the scanner. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 4.1 Cleaning materials and locations requiring cleaning 4.2 Cleaning the ADF 4.
CONTENTS 4.1 Cleaning material and locations requiring cleaning Introduction 1 NAMES AND FUNCTIONS OF PARTS 1. Cleaning material 2 BASIC SCANNER OPERATION Cleaning material Part No. Remarks 3 SCANNING VARIOUS TYPES OF DOCUMENTS Cleaning paper CA99501-0012 Used with Cleaner F1 Cleaner F1 (or isopropyl alcohol) CA99501-0013 1 bottle Moisten cloth with this fluid and wipe the scanner clean. Cleaner F2 CA99501-0014 1 bottle 70 ml/bottle For cleaning of plastic rollers only.
CONTENTS 4.1 Cleaning material and locations requiring cleaning (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 2.
CONTENTS 4.2 Cleaning the ADF Introduction 1 NAMES AND FUNCTIONS OF PARTS 4.2.1 Cleaning the ADF using with a cloth moisten with Cleaner F1 2 BASIC SCANNER OPERATION Cleaning the Brake roller, Glasses, Sheet guides, Plastic rollers 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 4.1 Cleaning materials and locations requiring cleaning 1. Open the ADF while pushing the ADF button. 2. Using a cloth moisten with Cleaner F1, clean the Brake roller, Glasses, Sheet guides, Plastic rollers. 3.
CONTENTS 4.2 Cleaning the ADF (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 4.2.1 Cleaning the ADF using with a cloth moisten with Cleaner F1 (Continued from the previous page) 2 BASIC SCANNER OPERATION Cleaning the Pick roller set, Feed rollers 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 1. Open the ADF while pushing the ADF button. If you open the ADF when the indication of the Function No.
CONTENTS 4.2 Cleaning the ADF (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 4.2.1 Cleaning the ADF using with a cloth moisten with Cleaner F1 (Continued from the previous page) 2 BASIC SCANNER OPERATION Cleaning the Chute roller 3 SCANNING VARIOUS TYPES OF DOCUMENTS Open the Chute roller cover and clean the roller using a cloth moisten with Cleaner F1. 4 DAILY CARE 4.1 Cleaning materials and locations requiring cleaning 4.2 Cleaning the ADF 4.
CONTENTS 4.2 Cleaning the ADF (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 4.2.2 Cleaning the ADF using Cleaning paper 2 BASIC SCANNER OPERATION 1. Open the ADF while pushing the ADF button. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 2. Apply Cleaner F1 o a new piece of cleaning paper. 4 DAILY CARE 4.1 Cleaning materials and locations requiring cleaning 4.2 Cleaning the ADF 3. Place the cleaning paper on the ADF so that its edge contact the plastic rollers. 4.
CONTENTS 4.3 Cleaning the Flatbed Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 1. Open the Document cover holding the handle. 2. Using a cloth moisten with Cleaner F1, lightly wipe off dirt on th glass part and the Document holding pad. 3. Let the Document bed dry about a few minutes. 4. Close the Document cover. 4.1 Cleaning materials and locations requiring cleaning 4.2 Cleaning the ADF 4.
CONTENTS Chapter 5 REPLACING CONSUMABLES Introduction 1 NAMES AND FUNCTIONS OF PARTS This chapter describes how to replace scanner consumables. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle 5.2 Replacing the brake roller 5.
CONTENTS 5.1 Consumable and Replacement Cycle Introduction 1 NAMES AND FUNCTIONS OF PARTS The following table shows the specifications of consumables and guidelines for the replacement cycle. 2 BASIC SCANNER OPERATION Description Parts No. Standard Replacement Cycle 3 SCANNING VARIOUS TYPES OF DOCUMENTS Brake roller PA03338-K010 After 250,000 scans or one year 4 DAILY CARE Pick roller* PA03338-K011 After 250,000 sheets or one year 5 REPLACING CONSUMABLES 5.
CONTENTS 5.1 Consumable and Replacement Cycle (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES ● Guidelines for Consumable Replacement Cycle With this product, you can learn how many times the consumables are used so that you can estimate the right timing for the replacement. 1. When turning on the power, check that the scanner is connected to your PC. Refer to "2.
CONTENTS 5.1 Consumable and Replacement Cycle (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2. From [Start] menu, select [All Programs] - [Scanner Utility for Microsoft Windows] and click [Software Operation Panel]. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle 5.2 Replacing the brake roller 5.
CONTENTS 5.1 Consumable and Replacement Cycle (Continued from the previous page) Introduction 3. Click the [Device Setting] tab 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION >> The following panel appears. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle 5.2 Replacing the brake roller 5.
CONTENTS 5.1 Consumable and Replacement Cycle (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS The following message may appear while you use the scanner: 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle 5.2 Replacing the brake roller 5.3 Replacing the pick roller set 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF Replace consumables when this message is displayed.
CONTENTS 5.1 Consumable and Replacement Cycle (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS The following message may appear while you use the scanner: 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle 5.2 Replacing the brake roller 5.3 Replacing the pick roller set 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF Replace consumables when this message is displayed.
CONTENTS 5.1 Consumable and Replacement Cycle (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES ● When Replacing Consumables Immediately 1. To replace consumables after completing the scanning of all the document sheets in the ADF, click the [Ignore] button. To abort scanning and replace the consumables immediately, click the [Cancel] button. 2. Replace the consumables.
CONTENTS 5.1 Consumable and Replacement Cycle (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle ● When Consumables Cannot Be Replaced Immediately 1. To continue scanning of the current document, click the [Ignore] button. To stop scanning, click the [Cancel] button. 2.
CONTENTS 5.2 Replacing the brake roller Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle 5.2 Replacing the brake roller 5.3 Replacing the pick roller set 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix 1. Remove all documents from the ADF paper chute. 2. Open the ADF cover by pushing down the ADF button. 3.
CONTENTS 5.3 Replacing the pick roller set Introduction 1 NAMES AND FUNCTIONS OF PARTS 1. Open the ADF while pushing the ADF button. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and replacement cycle 5.2 Replacing the brake roller 5.3 Replacing the pick roller set 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix 2. Remove the ADF paper chute from the scanner. 3.
CONTENTS Chapter 6 TROUBLESHOOTING Introduction 1 NAMES AND FUNCTIONS OF PARTS This chapter describes how to remedy document jams, other troubles, items to check before contacting the dealer where you bought the scanner, and how to check the device labels. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 6.1 Removing jammed documents 6.2 Indications of operator panel for errors 6.
CONTENTS 6.1 Removing jammed documents Introduction 1 NAMES AND FUNCTIONS OF PARTS ATTENTION 2 BASIC SCANNER OPERATION -The glass surface inside the ADF becomes hot during the operation. Be careful not to touch the glass surface inside the ADF. 3 SCANNING VARIOUS TYPES OF DOCUMENTS -Be careful not to pinch your fingers with the ADF. 4 DAILY CARE If a document jam occurred because of double-feeding, etc., follow the procedure below to remove the jammed documents.
CONTENTS 6.2 Indications of operator panel for errors Introduction 3 SCANNING VARIOUS TYPES OF DOCUMENTS When any error occurred, the operator panel indicates "U" for temporary errors or "E" for device alarm (permanent error). Temporary errors can be resolved by the operator, but the device alarm requires recovery works by support engineers. When Error Recovery Guide is installed on your PC, its window appears when Windows is started up.
CONTENTS 6.
CONTENTS 6.2 Indications operator panel for errors (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS Indication Meaning 2 BASIC SCANNER OPERATION Ec Memory malfunction 3 SCANNING VARIOUS TYPES OF DOCUMENTS ED SPC malfunction 4 DAILY CARE EF Background switching mechanism malfunction E10 ROM malfunction E11 Fan malfunction E12 Heater malfunction E13 (Reserve) E14 (Reserve) E15 Extended memory option malfunction * See ATTENTION as below.
CONTENTS 6.3 Items to check before contacting the dealer where you bought the scanner Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION Before you ask for repair service, click the link below to display Trouble shooting table and check the items on the table.
CONTENTS Trouble Shooting Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING The scanner cannot be turned ON. The Function No. display indicates an alarm after the scanner is powered ON. Indication on the Function No. display goes out. The scanning does not start. The scanning does not start. Quality of scanned pictures or photos is not satisfactory. 6.
CONTENTS Symptom : The scanner cannot be turned ON. Introduction 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS Is the power cable correctly connected? Connect the power cable correctly. NO 4 DAILY CARE 5 REPLACING CONSUMABLES YES 6 TROUBLESHOOTING 6.1 Removing jammed documents Push the power button. Did you push the power button? NO 6.2 Indications of operator panel for errors 6.
CONTENTS Introduction Symptom : The Function No. display indicates an alarm ("E" and any number or character) after the scanner is powered ON. 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE (When the scanner is just installed on the place) Did you unlock the shipping lock? NO Turn OFF the scanner and unlock the shipping lock, then turn ON the scanner again. Reference : "Getting Started" 2.
CONTENTS Symptom : Indication on the Function No. display goes out. Introduction 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS Does the display remain blank even after you push any button on the operator panel? The scanner operation is normal. NO 4 DAILY CARE 5 REPLACING CONSUMABLES YES 6 TROUBLESHOOTING 6.1 Removing jammed documents Does the display remain blank even after running ON the scanner again? 6.
CONTENTS Symptom : The scanning does not start. Introduction 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS Did you unlock the shipping lock? NO Turn OFF the scanner and unlock the shipping lock. Reference : "Getting Started" 2.1 Installing the scanner 4 DAILY CARE 5 REPLACING CONSUMABLES YES 6 TROUBLESHOOTING 6.1 Removing jammed documents Load the documents correctly onto the ADF paper chute.
CONTENTS Symptom : Quality of scanned pictures or photos is not satisfactory. Introduction 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS Did you select half toning or dithering? Select half toning or dithering on your PC. NO 4 DAILY CARE 5 REPLACING CONSUMABLES YES 6 TROUBLESHOOTING 6.1 Removing jammed documents Are the upper/lower glasses inside the ADF, the document bed, and the document holding pad clean? 6.
CONTENTS Symptom : Quality of scanned text or lines is not satisfactory. Introduction 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS Are the upper/lower glasses inside the ADF, the document bed, and the document holding pad clean? 4 DAILY CARE 5 REPLACING CONSUMABLES YES 6 TROUBLESHOOTING 6.1 Removing jammed documents If you cannot solve the problem after taking measures, check the items in "6.
CONTENTS Symptom : Images are distorted or blurred. Introduction 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS Are the upper/lower glasses inside the ADF, the document bed, and the document holding pad clean? Clean dirty locations. NO 4 DAILY CARE 5 REPLACING CONSUMABLES YES 6 TROUBLESHOOTING 6.1 Removing jammed documents Is the ADF cover pressed down or heavy object placed on the ADF during scanning? 6.
CONTENTS Symptom : Vertical lines appear in the scanned images. Introduction 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS Clean the glass. Did you scan the document with the Flatbed? YES 4 DAILY CARE NO 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 6.1 Removing jammed documents Clean the upper/lower glasses inside the ADF. Do the lines appear on the same part of images? YES 6.
CONTENTS Symptom : Double-feed errors occur frequently. Introduction 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION Do the documents satisfy the conditions described in "8.2 3 SCANNING VARIOUS TYPES OF DOCUMENTS Use documents that satisfy the requirements. Document Quality"? NO 4 DAILY CARE 5 REPLACING CONSUMABLES YES 6 TROUBLESHOOTING 6.
CONTENTS Symptom : Pickup errors occur frequently. Introduction 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION Do the documents satisfy the conditions described in "8.2 3 SCANNING VARIOUS TYPES OF DOCUMENTS Use documents that satisfy the requirements. Document Quality"? NO 4 DAILY CARE 5 REPLACING CONSUMABLES YES 6 TROUBLESHOOTING 6.1 Removing jammed documents Were the documents fanned before loaded onto the ADF paper chute? 6.
CONTENTS Symptom : Paper jams occur frequently. Introduction 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION Do the documents satisfy the conditions described in "8.2 3 SCANNING VARIOUS TYPES OF DOCUMENTS Use documents that satisfy the requirements. Document Quality"? NO 4 DAILY CARE 5 REPLACING CONSUMABLES YES 6 TROUBLESHOOTING 6.1 Removing jammed documents Clean the ADF or remove debris from the ADF. Is there any debris in the ADF? YES 6.
CONTENTS Symptom : The scanned images are elongated Introduction 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS Clean all of the roles. Did you cleaned all of the rollers? NO 4 DAILY CARE 5 REPLACING CONSUMABLES YES 6 TROUBLESHOOTING 6.1 Removing jammed documents Do the documents satisfy the conditions described in "8.2 Use documents that satisfy the requirements. Document Quality"? NO 6.
CONTENTS Symptom : There is a shadow on the leading edge of the scanned images. Introduction 1 NAMES AND FUNCTIONS OF PARTS Back to the trouble shooting index 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS Did you adjust the offset (starting position for scanning the 4 DAILY CARE document)? NO From [Start] menu, select [All Programs] - [Scanner Utility for Microsoft Windows] and click [FUJITSU Software Operation Panel].
CONTENTS Introduction 6.3 Items to check before contacting the dealer where you bought the scanner (Continued from the previous page) 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS Please print out the Check List as below, it will be displayed on a new window when you click the link, and fill as much information as possible before contacting the agent. The check list. 4 DAILY CARE 1|2 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 6.
Items to check before contacting the dealer where you bought the scanner Installation or PC connection issues Trouble of connection to your PC Meaning Check the following items before you contact the dealer where you bought the scanner. Findings OS General Details Meaning Model Serial No. Production date Displayed error message (For support engineers, please record the error message and send images of captured screen.
CONTENTS 6.4 Checking labels on the scanner Introduction 1 NAMES AND FUNCTIONS OF PARTS The equipment labels of fi-5750C Image Scanner are as follows. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 6.1 Removing jammed documents 6.2 Indications of operator panel for errors 6.3 Items to check before contacting the dealer where you bought the scanner 6.
CONTENTS Chapter 7 ONLINE SETUP Introduction 1 NAMES AND FUNCTIONS OF PARTS This chapter describes settings of fi-5750C Image Scanner using "Software Operation Panel". 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.2 Double-feed detection 7.3 Setting edge erasing 7.4 Setting dropout color 7.5 Setting of pre-pick mode 7.6 Resetting the consumable counters 7.7 Adjusting the offset 7.
CONTENTS 7.1 Online setup Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS "Software Operation Panel" is an application program that is installed with driver software (TWAIN/ISIS). This software allows you to configure various settings for fi-5750C with user-friendly interfaces. To start this application, select [All Programs] - [Scanner Utility for Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel].
CONTENTS 7.1 Online setup (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS The following shows the contents of the setup: 2 BASIC SCANNER OPERATION No Meaning Description Selectable parameter The initial value 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 Dropout Color Use this function to drop out a color in Grayscale or Binary mode. Red/Green/Blue/White Green 5 Pre pick Select "Yes" to enable Prepicking, otherwise select "No".
CONTENTS 7.2 Double-feed detection Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION The settings for the double feed detection are as follows. 1. Click [Device Setting 2] tab, then select [DoubleFeed] from [Preferences]. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.2 Double-feed detection 7.3 Setting of Page Edge Filler 7.4 Setting dropout color 7.5 Setting of pre-pick mode 7.
CONTENTS 7.3 Setting of Page Edge Filler Introduction 1 NAMES AND FUNCTIONS OF PARTS 1. When you scan documents with the ADF, click [Device Setting 2] tab, and select [PageEdgeFille(ADF)] from [Preferences]. Then specify the area to delete by entering value in [Top], [Bottom], [Right] and [Left]. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.2 Double-feed detection 7.
CONTENTS 7.3 Setting of Page Edge Filler (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2. When you scan documents with the Flatbed, click [Device Setting 2] tab, and select [PageEdgeFille(FB)] from [Preferences]. Then specify the area to delete by entering value in [Top], [Bottom], [Right] and [Left]. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.
CONTENTS 7.4 Setting dropout color Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION Set a color to be dropped out as follows. 1. Click [Device Setting 2] tab, and select [Dropout color] from [Preferences]. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.2 Double-feed detection 7.3 Setting of Page Edge Filler 7.4 Setting dropout color 7.5 Setting of pre-pick mode 7.6 Resetting the consumables counters 7.
CONTENTS 7.5 Setting of pre-pick mode Introduction 1 NAMES AND FUNCTIONS OF PARTS The settings of the pre-pick mode are as follows. 1. Click [Device Setting 2] tab, and select [Pre-Pick] from [Preferences]. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.2 Double-feed detection 7.3 Setting of Page Edge Filler 7.4 Setting dropout color 7.5 Setting of pre-pick mode 7.
CONTENTS 7.6 Resetting the consumables counters Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION Reset the consumables counters as follows. 1. Click [Device Setting] tab. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.2 Double-feed detection 7.3 Setting of Page Edge Filler 7.4 Setting dropout color 7.5 Setting of pre-pick mode 7.6 Resetting the consumables counters 7.7 Adjusting the offset 7.
CONTENTS 7.7 Adjusting The Offset Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION The settings for adjusting the offset are as follows. 1. Select [Device Setting] tab and click [Offset] button. >> The following panel appears. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.2 Double-feed detection 7.3 Setting of Page Edge Filler 7.4 Setting dropout color 7.5 Setting of pre-pick mode 7.
CONTENTS 7.8 Adjust the magnification Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION The the setting for the magnification is as follows. 1. Select [Device Setting] tab and click [Offset] button. >> The following panel appears. 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.2 Double-feed detection 7.3 Setting of Page Edge Filler 7.4 Setting dropout color 7.5 Setting of pre-pick mode 7.
CONTENTS 7.9 Power saving Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS The setting for the power saving is as follows. 1. Select [Device Setting] tab. 2. Using the slider control under [Power saving], specify waiting time for switching the scanner operation to power save mode. 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.2 Double-feed detection 7.3 Setting of Page Edge Filler 7.
CONTENTS Chapter 8 DOCUMENT SPECIFICATION OF ADF Introduction 1 NAMES AND FUNCTIONS OF PARTS This chapter describes the required document sizes and paper quality for ensuring a correct operation when scanning documents on the ADF. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 8.1 Document size 8.2 Document quality 8.3 Maximum ADF capacity 8.4 Area not to be perforated 8.
CONTENTS 8.1 Document size Introduction 1 NAMES AND FUNCTIONS OF PARTS The following shows the size of documents that can be scanned. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 8.1 Document size 8.2 Document quality 8.3 Maximum ADF capacity 8.4 Area not to be perforated 8.
CONTENTS 8.2 Document quality Introduction 2 BASIC SCANNER OPERATION It is recommended to use documents of wood free paper and wood containing paper. When using other kinds of papers, perform a testscanning with a few sheets of the same type before executing the actual task in order to check whether or not the documents can be scanned. 3 SCANNING VARIOUS TYPES OF DOCUMENTS Paper thickness is expressed by "paper weight".
CONTENTS 8.2 Document quality (Continued) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION Do not use the following documents: ● ● 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES ● ● ● HINT ● 6 TROUBLESHOOTING Paper-clipped or stapled documents Documents on which the ink is still wet Documents smaller than A8 (Portrait) in size Documents wider than A3 or 11 in. x 17 in.
CONTENTS 8.3 Maximum ADF capacity Introduction 1 NAMES AND FUNCTIONS OF PARTS The maximum number of sheets that can be loaded on the ADF paper chute is determined by the size and weight of the documents. The following shows the maximum document loading capacity of the ADF according to the paper weight. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 8.1 Document size 8.
CONTENTS 8.4 Area not to be perforated Introduction 1 NAMES AND FUNCTIONS OF PARTS When using the ADF, document trouble might occur if there is any pouched hole in the shaded area in the following figure. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 8.1 Document size 8.2 Document quality 8.3 Maximum ADF capacity 8.4 Area not to be perforated 8.
CONTENTS 8.5 Double feed detection conditions Introduction 1 NAMES AND FUNCTIONS OF PARTS To obtain a correct monitoring and preventing miss detections of doublefeeds, the documents have to meet the following conditions. 2 BASIC SCANNER OPERATION Check overlapping 3 SCANNING VARIOUS TYPES OF DOCUMENTS Paper weight : 41 g/m2 - 203 g/m2 (10.9 lb to 53.9 lb) 4 DAILY CARE Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the document.
CONTENTS Chapter 9 OPTIONS Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION This chapter describes the options for fi-5750C Image Scanner. fi-5750C Image Scanner option. 3 SCANNING VARIOUS TYPES OF DOCUMENTS No. Name Spec Description 4 DAILY CARE 1 Document holding pad (black) PA03338-D960 Black background for Flatbed, which is replaced easily by user.
CONTENTS Chapter 9 OPTIONS (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 9.1 Additional memory board 2 BASIC SCANNER OPERATION When this option is installed on the scanner, it improves scanning performance at higher resolution setting. (For example, scanning operation will not be interrupted at both sides colored 401dpi or higher resolution .) 3 SCANNING VARIOUS TYPES OF DOCUMENTS 1. Remove the screws on the rear side of the scanner, and remove the covers.
CONTENTS Chapter 10 SCANNER SPECIFICATIONS Introduction 1 NAMES AND FUNCTIONS OF PARTS This chapter lists the scanner specifications. 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS 10.1 Basic Specification 10.2 Installation specification 10.
CONTENTS 10.1 Basic Specifications Introduction 1 NAMES AND FUNCTIONS OF PARTS No.
CONTENTS 10.1 Basic Specifications (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS No.
CONTENTS 10.
CONTENTS 10.3 External dimensions Introduction 1 NAMES AND FUNCTIONS OF PARTS The external dimension of the fi-5750C Image Scanner 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS 10.1 Basic Specification 10.2 Installation specification 10.
CONTENTS 10.3 Physical dimensions (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS 10.1 Basic Specification 10.2 Installation specification 1|2 10.
CONTENTS Appendix Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION The Appendix is structured as follows: Appendix 1 Before using [Scan] button and [Send to] button Appendix 2 Glossary 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix Appendix 1 "Scan" button and "Send to" button Appendix 2 Glossary (Not available in this manual.
CONTENTS Appendix 1 Before using [Scan] button and [Send to] button Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING By setting the link of the application software to the [ Scan ] button and [ Send to ] button, you can launch the linked application by simply pushing the button. For Windows 98, Windows Me, Windows 2000 and Windows XP: 1. Select [ Control panel ] from the [ Start ] menu. 2.
CONTENTS Appendix 1 Before using [Scan] button and [Send to] button (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 5. Select the application executed by the event. For Windows XP, select [ Performing selected program ] under [ Performing ] and then select the application to be processed.
CONTENTS Appendix 1 Before using [Scan] button and [Send to] button (Continued from the previous page) Introduction 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS -For Windows 95 and Windows NT 4.0: 1. Right click [ FUJITSU Scanner Control Center ] on the task trail and select [ Option ]. 2. Select the event for starting up the application from the [ Event ] menu. With this function, the next events can be selected.
