Network Adapter Getting Started fi-5000N
Table Of Contents
- CONTENTS
- INTRODUCTION
- Chapter 1 Overview of fi-5000N
- Chapter 2 Names and Functions of Parts
- Chapter 3 Installing the fi-5000N
- 3.1 Installing the Scanner
- 3.2 Installing the fi-5000N
- 3.3 fi-5000N's Settings and Connecting to the Network
- 3.4 Changing the Language Setting
- 3.5 Automatic Turning Backlight Off Settings
- 3.6 Beep Sound Configuration
- 3.7 Pull Mode User Authentication Settings
- 3.8 Push Mode Automatic Logout Time Settings
- 3.9 Host Connection Time-out
- 3.10 Displaying Device Information
- 3.11 Initialization of fi-5000N
- Chapter 4 Installing and Setting Driver
- Chapter 5 Installing and setting the fi-5000N Software
- Chapter 6 User Authentication
- Chapter 7 Daily Care
- Chapter 8 Troubleshooting
- Chapter 9 Specifications
- APPENDIX Using User Authentication by Fingerprint
- INDEX
54
■ Deleting Users
You can delete the information of registered users with the following procedure.
1. Select (click) the user name you want to delete from the List View.
2. Click the [Delete] button.
3. Click [Yes] when the confirmation message appears.
■ Backing up User Information
1. Click the [Backup] button.
2. Specify the destination and the file name and click the [Save] button when the follow-
ing screen appears.
3. The screen to set the backup password for the file to be saved appears.
Enter the password up to 16 characters. (To confirm, enter the password again.)
4. Click the [OK] button.
⇒The user information is saved to a file.
ATTENTION
This password is required when you do a restoration. Note that if you forget
the password, the backed up files cannot be restored.