Network Adapter Getting Started fi-5000N
Table Of Contents
- CONTENTS
- INTRODUCTION
- Chapter 1 Overview of fi-5000N
- Chapter 2 Names and Functions of Parts
- Chapter 3 Installing the fi-5000N
- 3.1 Installing the Scanner
- 3.2 Installing the fi-5000N
- 3.3 fi-5000N's Settings and Connecting to the Network
- 3.4 Changing the Language Setting
- 3.5 Automatic Turning Backlight Off Settings
- 3.6 Beep Sound Configuration
- 3.7 Pull Mode User Authentication Settings
- 3.8 Push Mode Automatic Logout Time Settings
- 3.9 Host Connection Time-out
- 3.10 Displaying Device Information
- 3.11 Initialization of fi-5000N
- Chapter 4 Installing and Setting Driver
- Chapter 5 Installing and setting the fi-5000N Software
- Chapter 6 User Authentication
- Chapter 7 Daily Care
- Chapter 8 Troubleshooting
- Chapter 9 Specifications
- APPENDIX Using User Authentication by Fingerprint
- INDEX
5.4 Managing User Information of fi-5000N
fi-5000N Operator’s Guide 53
Installing and setting the fi-5000N Software
5
⇒ The registering process runs.
■ Changing User Information
You can change the information of registered users with the following procedure.
1. Select (click) the user name you want to change from the List View.
2. Change either the "New PIN" or the "Host name/IP address" when the user name
selected in the "User Name:" column is displayed, and click the [Enter] button.
3. Click [Yes] when the confirmation message appears.
HINT
It is possible to register a maximum of 32 users.
New PIN Fill in the User PIN up to 6 digits. You cannot leave it blank.
Host name/IP address Enter the IP address or the host name of the PC used by the
user. You cannot leave it blank.
Example: IP Address: 192.168.1.200
Host name: pc.fi-domain.xx.jp
HINT
You cannot change the user ID and the user name.