Network Adapter Getting Started fi-5000N
Table Of Contents
- CONTENTS
- INTRODUCTION
- Chapter 1 Overview of fi-5000N
- Chapter 2 Names and Functions of Parts
- Chapter 3 Installing the fi-5000N
- 3.1 Installing the Scanner
- 3.2 Installing the fi-5000N
- 3.3 fi-5000N's Settings and Connecting to the Network
- 3.4 Changing the Language Setting
- 3.5 Automatic Turning Backlight Off Settings
- 3.6 Beep Sound Configuration
- 3.7 Pull Mode User Authentication Settings
- 3.8 Push Mode Automatic Logout Time Settings
- 3.9 Host Connection Time-out
- 3.10 Displaying Device Information
- 3.11 Initialization of fi-5000N
- Chapter 4 Installing and Setting Driver
- Chapter 5 Installing and setting the fi-5000N Software
- Chapter 6 User Authentication
- Chapter 7 Daily Care
- Chapter 8 Troubleshooting
- Chapter 9 Specifications
- APPENDIX Using User Authentication by Fingerprint
- INDEX
48
5.3 Adding and Deleting fi-5000N
When a fi-5000N is in the same subnet as the PC, it is automatically recognized and displayed in
the List View. However, when it is in other subnet, add or delete with the following procedure.
■ Adding fi-5000N
1. Click the [Add] button on the main screen of fi-5000N Configuration Tool.
2. Specify the IP address or host name of the fi-5000N to be added.
Select either the "IP Address:" or "Host Name", and enter the necessary information.
Example of entry: IP Address: 192.168.1.100
Host name: fi-5000n-00-01.fi-domain.xx.jp