Network Adapter Getting Started fi-5000N
Table Of Contents
- CONTENTS
- INTRODUCTION
- Chapter 1 Overview of fi-5000N
- Chapter 2 Names and Functions of Parts
- Chapter 3 Installing the fi-5000N
- 3.1 Installing the Scanner
- 3.2 Installing the fi-5000N
- 3.3 fi-5000N's Settings and Connecting to the Network
- 3.4 Changing the Language Setting
- 3.5 Automatic Turning Backlight Off Settings
- 3.6 Beep Sound Configuration
- 3.7 Pull Mode User Authentication Settings
- 3.8 Push Mode Automatic Logout Time Settings
- 3.9 Host Connection Time-out
- 3.10 Displaying Device Information
- 3.11 Initialization of fi-5000N
- Chapter 4 Installing and Setting Driver
- Chapter 5 Installing and setting the fi-5000N Software
- Chapter 6 User Authentication
- Chapter 7 Daily Care
- Chapter 8 Troubleshooting
- Chapter 9 Specifications
- APPENDIX Using User Authentication by Fingerprint
- INDEX
44
5.2 fi-5000N Software Overview
■ Starting fi-5000N Configuration Tool
To start the fi-5000N software, from the [Start] menu, select [All Programs] -> [fi-5000N Soft-
ware] -> [fi-5000N Configuration Tool].
■ [Select Scanner] Tab (Main Screen)
This screen (in which the [Select Scanner] tab is selected) is the main screen.
All kinds of administrative settings of fi-5000N can be done from this screen.
ATTENTION
If Windows XP Service Pack 2 is installed, [Windows Security Alert] dialog
box may appear when starting up fi-5000N Software. If [Keep Blocking] is
selected with Windows firewall, PC cannot communicate with fi-5000N. In
this case, click [Unblock] to start the program.
Tabs
List View
The fi-5000Ns connected to the network are displayed in a list.
Buttons