Network Adapter Getting Started fi-5000N
Table Of Contents
- CONTENTS
- INTRODUCTION
- Chapter 1 Overview of fi-5000N
- Chapter 2 Names and Functions of Parts
- Chapter 3 Installing the fi-5000N
- 3.1 Installing the Scanner
- 3.2 Installing the fi-5000N
- 3.3 fi-5000N's Settings and Connecting to the Network
- 3.4 Changing the Language Setting
- 3.5 Automatic Turning Backlight Off Settings
- 3.6 Beep Sound Configuration
- 3.7 Pull Mode User Authentication Settings
- 3.8 Push Mode Automatic Logout Time Settings
- 3.9 Host Connection Time-out
- 3.10 Displaying Device Information
- 3.11 Initialization of fi-5000N
- Chapter 4 Installing and Setting Driver
- Chapter 5 Installing and setting the fi-5000N Software
- Chapter 6 User Authentication
- Chapter 7 Daily Care
- Chapter 8 Troubleshooting
- Chapter 9 Specifications
- APPENDIX Using User Authentication by Fingerprint
- INDEX
30
7. When the [InstallShield Wizard Complete] window appears, click [Finish].
⇒ Your PC will be restarted. Do not remove the Setup CD-ROM until your PC has com-
pletely restarted.
Installation of the scanner driver is completed.
ATTENTION
To complete the installation successfully, you must restart your PC.
HINT
In order to use the scanner, it is also necessary to have an application that
complies with the TWAIN standard.
Use "ScandAll 21" bundled with the fi-5000N.
To install ScandAll 21, refer to "4.2 Installing ScandAll 21" (page 31).