Network Adapter Getting Started fi-5000N
Table Of Contents
- CONTENTS
- INTRODUCTION
- Chapter 1 Overview of fi-5000N
- Chapter 2 Names and Functions of Parts
- Chapter 3 Installing the fi-5000N
- 3.1 Installing the Scanner
- 3.2 Installing the fi-5000N
- 3.3 fi-5000N's Settings and Connecting to the Network
- 3.4 Changing the Language Setting
- 3.5 Automatic Turning Backlight Off Settings
- 3.6 Beep Sound Configuration
- 3.7 Pull Mode User Authentication Settings
- 3.8 Push Mode Automatic Logout Time Settings
- 3.9 Host Connection Time-out
- 3.10 Displaying Device Information
- 3.11 Initialization of fi-5000N
- Chapter 4 Installing and Setting Driver
- Chapter 5 Installing and setting the fi-5000N Software
- Chapter 6 User Authentication
- Chapter 7 Daily Care
- Chapter 8 Troubleshooting
- Chapter 9 Specifications
- APPENDIX Using User Authentication by Fingerprint
- INDEX
28
4.1 Installing FUJITSU TWAIN 32 Scanner Driver
■ Preparation
Before starting the installation, check the following contents.
• Prepare the Setup CD-ROM.
• Uninstall any older versions of FUJITSU TWAIN 32 driver if already installed.
■ Installing
1. Turn on the power of the PC, and log on to Windows.
2. Insert the Setup CD-ROM into the CD drive.
⇒ <SETUP DISK START UP SCREEN> appears.
ATTENTION
• Although the scanner is bundled with its own scanner driver, to
connect the scanner to this product, you must use the scanner driver
bundled with this product.
• To uninstall previous versions, uninstall [Scanner Utility for Microsoft
Windows] from [Add/Remove Programs] of the Control Panel.
• We recommend you to check our website for the latest version of this
driver.
Our site is:
http://www.fujitsu.com/global/support/computing/peripheral/scanners
HINT
Windows XP screenshots are used in this section as examples.
The windows and operations may slightly vary depending on your OS.
ATTENTION
When using Windows 2000 or Windows XP, log on as a user with
"Administrator" rights.
ATTENTION
This screen may not appear when the "Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this CD-ROM directly from the "Explorer" or
"My Computer".