Network Adapter Getting Started fi-5000N
Table Of Contents
- CONTENTS
- INTRODUCTION
- Chapter 1 Overview of fi-5000N
- Chapter 2 Names and Functions of Parts
- Chapter 3 Installing the fi-5000N
- 3.1 Installing the Scanner
- 3.2 Installing the fi-5000N
- 3.3 fi-5000N's Settings and Connecting to the Network
- 3.4 Changing the Language Setting
- 3.5 Automatic Turning Backlight Off Settings
- 3.6 Beep Sound Configuration
- 3.7 Pull Mode User Authentication Settings
- 3.8 Push Mode Automatic Logout Time Settings
- 3.9 Host Connection Time-out
- 3.10 Displaying Device Information
- 3.11 Initialization of fi-5000N
- Chapter 4 Installing and Setting Driver
- Chapter 5 Installing and setting the fi-5000N Software
- Chapter 6 User Authentication
- Chapter 7 Daily Care
- Chapter 8 Troubleshooting
- Chapter 9 Specifications
- APPENDIX Using User Authentication by Fingerprint
- INDEX
2
1.1 Overview
The function of the fi-5000N is to connect a fi-series scanner to a computer through the network.
This framework is shown in the diagram below. This framework is referred to as the fi-5000N sys-
tem hereinafter.
.
This device connected to a fi-series scanner through the USB interface, can transmit scanned
images to a computer over networks. The fi-5000N makes it possible to scan documents without
touching a computer at sites where scanning documents are required. Furthermore, only permitted
operators can input images as this device has a built-in fingerprint identification mechanism.
With the fi-5000N, you can build up a system whereby you can scan documents easily and securely
without operating a computer in places where logon to a computer were required
fi-5000N
Scanner
Computer
Network