Hl Main status icons : Signal strength : During International roaming : Out of service area CPS is connected/used : EDGE is connected/used /@ : 3G (packet) is counteracted : Airplane mode : WI-Fi is connected : Bluetooth function is ON : Connecting to Bluetooth device : SCAMS-T is not supported : During Data synchronization : Mosaic-Keitai lock is set : UIM is not inserted : Alarm is set : Speaker phone is on : Microphone is muted : Ringtone volume 0 : Vibration mods is on : Public mode {Drive mode) : Silen
© When the screen display is turned off When no operation is performed in certain period of time, the display is automatically turned off and the FOAM terminal is put into pleas mode. Hor Sleep mods is deactivated, and the lock screen appears. INFORMATION common comm cme * When activating sleep mode manually, press [3] display mods. * When receiving a call or SMS message while in sleep mode, sleep mode is deactivated.
+ Notifies new mails. Tap to activate any of tip-mode mail, Email, or SMS according te the new mail screen settings. ® Page display Displays the position of the currently displayed screen among 5 home crassness. INFORMATION * On the Coma screen, (MEND] —+Tap [Settings] to display setting menu. —P47 © Displaying the application menu from the Home screen Display the application menu so that you can activate registered applications or change the FOAM terminal settings.
& Checking profile From the Home screen, [Profile] Your phone number and information saved to [Profile] can be displayed.
Specific Absorption Rate (SAR) of Mobile Phones This model F-12C mobile phone complies with Japanese technical regulations and international guidelines regarding exposure to radio waves. This mobile phone was designed in observance of Japanese technical regulations regarding exposure to radio waves and limits to exposure to radio waves recommended by a set of equivalent international guidelines.
This mobile phone complies with tha EU requirements for exposure to radii waves. Your mobile phone is a radio transceiver, designed and manufactured not to exceed the SAR" limits" for exposure to energy, which SAR" value, when tested for compliance against the standard was 0.402 Wig. While there may be differences between the SAR" levels of various phones and at various positions, they all meet’ the EU requirements for RF exposure.
Before a phone modal is available for sale to the public, it must be tested and certified to prove to the FCC that it does not exceed the limit established by the U.S. government adopted requirement for safe exposures. The tests are performed on position and locations (for example, at the ear and wom on the body) as required by FCC for each model. The highest SAR value for this model phone as reported to the FCC, when tested for use at the ear, is 1.000 Wig, and when wom on the body, is 1.010 Wig.
