[Thank you for purchasing "F-12C" mobile terminal. Before using your FOAM terminal, or when necessary, read this manual to ensure safe use and handling. About manuals for F-12C The operations of F-12C are described in "Quick Start Guide" {in Japanese only}, "e L122" {installed in FOAM terminal} and "Instruction manual {detailed version)” (in pdf format). 5 * In this manual, "F-12C" mobile terminal is usually referred to as "FOAM terminal". * The images or illustration used in this manual are examples.
ll About manuals for F-12C .. Ml Accessories and main options FOTOMAT terminal HE SIM unlock .. Important precautions on using F-12C Hl Precautions {Always follow these directions) 3 HM Handling precautions 1 HE Waterproofs 15 Therefor using the FOAM terminal Part names and functions UIM micros D card Battery Pack Power ON/OFF Basic operations Initial settings Screenshots Home screen Applications screen Character Entry Lock/Security e U2 ete.
FOAM terminal * F-12C supports W-COMA, GSM/GPRS, Wireless LAN System. * Because your FOAM terminal uses wireless transmission, it may not function in locations whets it is difficult for radio waves to penetrate, such as tunnels, underground passages and some buildings, in areas where radio waves are weak, or out of service area. Even when you are high up in a tall building or condominium and nothing blocks your view outside, your FOAM terminal may not be able to receive or transmit signals.
gon DA LEER TLE LTE LH * Before using your FOAM terminal, or when necessary, read the precautions below to ensure safe use and handling. After reading this manual, keep it carefully. * Tess precautions are intended to protect you and others around you. Read and follow them carefully to avoid injury, damage to the product or damage to property. * The signs below differentiate between the levels of danger that can occur if the product is not used within the specified guidelines.
4 Handling FOAM terminal, battery pate, adapter, desktop holder and UIM {common} /DANGER Do not use, store, or leave the equipment in hot areas such as near flames or In areas under strong direct sunlight such as inside a vehicle. Don't o Don't se fire, burns or injuries. Do not put the terminal Into heating cooking device such as microwave oven or high pressure container. May cause fire, bums, injuries, electric shock. Do not disassemble or remodel the equipment.
Store the equipment out of reach of small children. May be accidentally swallowed or causal injuries. Do not turn on the light aiming directly at the driver of the car ete. May disturb driving and cause an accident. 0 0 Be careful especially when using FOAM terminal connected to the adapter continuously for a long time. If you use i-apple, or a videophone call while charging the battery for a long teems, FOAM terminal, battery pack and adapter may be heated.
Turn FOAM terminal OFF near high-precision electronic control equipment or electron: equipment using low-power signals. May cause the equipment to fail or malfunction. * Examples of electronics equipment to avoid. Hearing aids, implanted pacemakers or defibrillators, other electronic medical equipment, fire alarms, automatic doors and other automatic control equipment. Users wearing implanted pacemakers or defibrillators or other electronic medics] equipment should check with the.
@ Handling battery pack HB Check that the battery type matches the type displayed on the battery pack label. Li-ion 00 Li-ion battery /DANGER Do not connect a wire or other metal objects to the jack. And, do not carry or store FOAM terminal with objects like a metal necklace. May cause battery pack to ignites, burst, heat or leak. Check the orientation of battery pack to install it to FOAM terminal, and do not try to force the battery pack onto FOAM terminal if you are having trouble Installing i.
Do not use the AC adapter or desktop holder In a bathroom or other highly humid area. May cause frig, bums, electric shock. Always use the DC adapter with a neg; ground vehicle. Do not plug it into a positive ground vehicle. May cause fire, bums, electric shock. When it starts to thunder, do not touch Do not short the charging Jack while it Is connected to the outlet or cigarette lighter socket. Do not touch the charging jack with a part of your body such as your hand or finger.
@ Handling mobile phones near electronic medical equipment HW These precautions are based on the guidelines produced at the Electromagnetic Compatibility Conference Japan, regarding the protection of electronic medical equipment from radio waves 0 Do When electronic medical equipment other than Implanted pacemakers or defibrillators are in use outside of medical facilities (such as in home care settings), check with the device manufacturer to determine how the device Is affected by electrical signals.
Pa Mortal || Lien Pa Disco Camera (Camera High heat | UV hard coating Movable Facing ABS resin (UV hard coating lens panel resistance part Rear |panel transparent Surface Palisade |POM resin |None material (3/ LISA) Slide POM resin |None Camera ring |ABS resin | Chrome-plating stopper {Color Corner pad Elastoplast [None BLACK, resin (TEE) RED} Screw sheet | Polyester (None Camera ring acrylamide None film (Color: resin Top section |Stainless [None WHITE} antenna steel Light lens PC resin None Middle Stainle
UIM tray POM resin |None ® General * F-12C Is waterproof, however, do not allow water to seep into FOAM terminal and do not allow accessories or optional devices to get wet. Battery pack, adapter, desktop holder, UIM are not waterproof. Do not use in a bathroom or other highly humid area or do not let rain attached. Or putting the terminal on your body, humidity of sweat may cause internal corrosion and malfunction.
* Do not plug external devices into the external connection Jack (sarphone/microphone Jack) at a slant, or do not pull It forcibly while kt Is plugged. May cause malfunction or damage. * It is normal for FOAM terminal to become warm during use or charging. Continue to uss It. ® Do not leave FOAM terminal with the camera in areas under strong direct sunlight. May cause discoloring or burn-in of elements. * Use FOAM terminal with the textual connection Jack cap closed.
* Maintain a separate record of tha data you saved in UIM. If the data is deleted, COMO assumes no responsibility for the loss of any data. * To preserve the environment, bring the old UM to a sales outlet such as dotcom Shop. *® Take care not to scratch, touch accidentally or short IC. May cause data loss or malfunction. * Do not drop UIM or subject It to shocks. May cause malfunction. * Do not bend UIM or place heavy objects on it May cause malfunction.
