User Manual

F-07C_EN_ninshou
21
Basic Operation
Before Using
Charging
The battery pack does not have a full charge at time of purchase. Charge the battery before using the FOMA terminal.
a Insert the USB plug of USB cable
horizontally to the USB connection jack,
with the mark side upward
b Open microUSB connection jack cap ( a ), hold
the connector horizontally with the mark side
upward and insert it to the jack (
b )
c Insert the AC adapter's power plug into a
100V AC outlet
* Check that the charging light turns on.
* After charging is over, pull out the power plug
from the outlet, and pull out microUSB plug from
FOMA terminal horizontally.
Prepare Cradle Set F01, AC Adapter for Cradle F01,
and AC Adapter Power Cable for Cradle F01.
a Insert AC adapter's connection jack to cradle's
power jack (
a ), and power cable's connection
jack horizontally to AC adapter (
b )
b Insert the power cable's power plug into a
100V AC outlet
c Close the FOMA terminal, and insert it to cradle
with cradle connection jack cap opened
* Check that the charging light turns on.
* After charging is over, remove the FOMA
terminal from cradle.
Charging using AC Adapter F04 and USB Cable F01
Using cradle for charging
AC 100V
outlet
Connector
Release buttons
Connector
Jack cap
Power plug
AC adapter
Light
microUSB
plug adapter
for FOMA
charging F01
microUSB
plug
AC adapter
AC 100V
outlet
Power plug
Connector
Release buttons
Light
Insert at back side
Cradle
Connection
jack
仮
仮