User Manual Part 3
Table Of Contents
F-04B_E1kou
23
Basic Operation
Before Using
Charging
The battery pack does not have a full charge at time of purchase.
Charge FOMA terminal in basic style for fully charging both
battery packs of display unit and keypad unit
a
Open jack cap (
a
) of FOMA terminal, hold the
connector horizontally with the arrow side upward and
insert it to the jack. (
b
)
b
Unfold the power plug and insert it into a 100V AC
outlet.
*
Confirm that indicator light or arch light turns on.
c
When charging is over, pull out the power plug from
the outlet, and pull out from FOMA terminal
horizontally while pressing the release buttons on both
sides of the connector.
a
Insert the connector of AC adapter horizontally to the
accessory desktop holder, with the arrow mark side
upward.
b
Unfold the AC adapters power plug and insert it into a
100V AC outlet.
c
Join FOMA terminal units into basic style and insert it
into the desktop holder.
*
Confirm that indicator light or arch light turns on.
d
After charging is completed, remove FOMA terminal
from the desktop holder.
✜
Operations for charging
When charging starts, a charge start alert sounds. While charging, the
indicator light or arch light turns on and the battery icons on the display
blinks. When charging is ended, a charge completion alert sounds.
Charging using AC adapter
100V AC outlet
Connector
Release button
External
connection jack
Jack cap
Power plug
AC adapter
Indicator light
Arch light
Using desktop holder and AC adapter in
combination for charging
100V AC outlet
Indicator light
Arch light
Release
button
Connector
Desktop holder
Insert at the back side
AC adapter
Power plug