User Manual Part 3
Table Of Contents
F-04B_E1kou
22
Basic Operation
✜
Attaching Battery Pack F13
With label side of battery pack up, align convex parts of the battery
pack with concave parts of FOMA terminal, slide the battery pack in
the direction of
a
and then press it in the direction of
b
to set in.
✜
Attaching Back Cover F45
Place the 4 tabs of back cover to the notches, press back cover in the
direction of
a
to avoid forming any clearance between FOMA
terminal and back cover, then slide it in the direction of
b
to attach it.
Point
･
UIM (blue) is not available for this FOMA terminal. If you have the UIM
(blue), bring it to a docomo Shop.
Separate FOMA terminal and turn off the power of keypad unit,
and then perform properly with holding keypad unit in hand.
✜
Removing Back Cover F46
Hold keypad unit in one hand
not to slide and with pressing a
round mark of the back cover
with your thumb of the other
hand, and slide in the direction
of the arrow approximately 3
mm to remove it.
✜
Attaching Battery Pack F14
With label side of battery pack
up, align convex parts of the
battery pack with concave parts
of FOMA terminal, slide the
battery pack in the direction of
a
and then press it in the
direction of
b
to set in.
✜
Attaching Back Cover F46
Place the 4 tabs of back cover to
the notches, press back cover in
the direction of
a
to avoid
forming any clearance between
FOMA terminal and back cover,
then slide it in the direction of
b
to attach it.
Battery pack
Convex part
Concave part
Back cover
Attaching to keypad unit
Press here with
your thumb
Back cover
B
attery pack
Convex part
Concave part