F-03D INSTRUCTION MANUAL ’11.
Introduction Thank you for purchasing "F-03D" mobile terminal. Before using your terminal, or when necessary, read this manual to ensure safe use and handling. Before using the terminal ･ This terminal supports W-CDMA, GSM/GPRS, Wireless ･ ･ ･ ･ ･ LAN System.
Accessories and main options FOMA AC Adapter 01/02 F-03D (including Back Cover F65 and warranty) Battery Pack F23 Other options→P131 Quick start guide (Japanese) ･ In this manual, "F-03D" mobile terminal is usually referred to as "the terminal". ･ The images or illustration used in this manual are examples. They may differ from the actual displays.
Contents ■ Accessories and main options .........................1 ■ Important precautions on using the terminal .4 ■ Precautions (Always follow these directions) .............................................................................5 ■ Handling precautions ......................................13 ■ Waterproofness ...............................................18 Settings................................... 67 Setting menu.............................................................
File management..................... 95 Overseas use ......................... 127 Infrared communication .......................................... 95 Bluetooth communication....................................... 95 Connecting an external device................................ 98 Linking with DLNA device ....................................... 98 Outline of international roaming (WORLD WING) ..................................................................................
･ If your terminal is lost, change your each account Important precautions on using the terminal ･ ･ The terminal does not support i-mode sites (programs) or i-Dppli. ･ ･ ･ Google applications and service contents are subject to change without prior notice. ･ The terminal automatically performs communication for ･ ･ ･ ･ ･ ･ ･ some functions, for example, to synchronize data, check the latest software or maintain connection with the server.
Precautions (Always follow these directions) No wet hands This symbol denotes that using the phone or its components with wet hands is not allowed. No liquids This symbol denotes that using the phone or its components in a bathroom or other highly humid area is not allowed. ・ Before using your terminal, or when necessary, read the precautions below to ensure safe use and handling. After reading this manual, keep it carefully. ・ These precautions are intended to protect you and others around you.
Do not put the terminal into heating cooking device such as microwave oven or highDon’t pressure container. Do May cause fire, burns, injuries, electric shock. Do not disassemble or remodel the equipment. ･ Remove the power plug from the wall outlet or cigarette lighter socket. Turn the terminal OFF. Remove the battery pack from the terminal. May cause fire, burns, injuries, electric shock. ･ ･ No disassembly May cause fire, burns, injuries, electric shock.
◆ Handling the terminal WARNING Do Do not direct the infrared data port toward your eye and transmit signals. Don’t May cause harmful effect on eyes. Too loud volume may cause a hearing loss. And, if you cannot hear the sound around you clearly, it may cause an accident. Do not direct the infrared data port toward home electric appliances etc. equipped with Don’t infrared device when using infrared communication. May cause an accident because of malfunction of infrared device.
◆ Handling battery pack CAUTION ■ Check that the battery type matches the type displayed on the battery pack label. Do not swing the terminal by the strap, etc. Don’t May cause accident such as injury to yourself or others by hitting. Display Li-ion 00 Do not use the damaged terminal. Battery type Li-ion battery May cause fire, burns, injuries, electric shock. Don’t DANGER When using the motion sensor, check the safety around you, hold the terminal firmly, Don’t and do not shake it unnecessarily.
◆ Handling adapter and wireless charger WARNING If the battery pack seems to have abnormalities such as deformation or Don’t scratches due to falling, never use it. WARNING Do not use the adapter or wireless charger cord if it gets damaged. May cause battery pack to ignite, burst, heat or leak. Do Don’t If the battery pack leaks or gives off a strange smell, immediately remove it from the vicinity of open flames.
Do not apply an electrical transformer for overseas use to the wireless charger. Don’t May cause overheat, ignition, or electrical shock. Do Radio waves may affect the operation of implanted pacemakers or defibrillators, and other devices. Do not touch the adapter cord, wireless charger or outlet with wet hands. Always remove the power plug from the outlet or cigarette lighter when not using the Unplug adapter for an extended period. No wet hands May cause fire, burns, electric shock.
◆ Handling mobile phones near electronic medical equipment ■ These precautions are based on the guidelines produced at the Electromagnetic Compatibility Conference Japan, regarding the protection of electronic medical equipment from radio waves emitted by mobile phone units. Do The terminal's signals may affect the operation of implanted pacemakers or defibrillators, and other devices. WARNING Do Obey the following rules inside medical facilities.
Part Material Surface treatment Part 1Seg antenna installing Stainless metal plate steel Ni plating HDMI contacts 1Seg antenna fixing screw None Stereo earphone jack cap Outcamera panel Stainless steel Transparent Highsection strength acrylate resin UV hard coating Ring section ABS resin UV hard coating IRDA panel PMMA resin None Flash panel PC resin None Keypad PC resin UV hard coating Power key PC resin UV hard coating Volume button PC resin UV hard coating Fingerprint Senso
・ When using, be careful not to subject excessive force to Handling precautions ◆ General ・ F-03D is waterproof, however, do not allow water to seep into the terminal and do not allow accessories or optional devices to get wet. - Battery pack, adapter, wireless charger, or docomo mini UIM card are not waterproof. Do not use in a bathroom or other highly humid area or do not let rain touch. Or putting the terminal on your body, humidity of sweat may cause internal corrosion and malfunction.
・ Do not leave the terminal with the camera in areas under strong direct sunlight. - May cause discoloring or burn-in of elements. ・ Use the terminal with the external connection jack cap closed. - Dust and/or water brought into the terminal cause troubles. ・ Do not use the terminal with the back cover removed. - May cause removal of battery pack, malfunction or damage. ・ While microSD card is being used, do not take the card out and do not turn off the terminal. - May cause data loss or malfunction.
◆ Adapter, wireless charger ◆ docomo mini UIM card ・ Charge the battery in an area within the proper ambient ・ Do not use excessive force to install/remove docomo temperature range (5-35℃). mini UIM card. ・ Do not charge the battery in the areas below. ・ Note that DOCOMO assumes no responsibility for - In areas of excessive humidity, dust or vibrations - Near land-line phones or TVs/radios ・ It is normal for the adapter or wireless charger to become hot while charging. Continue to use it.
◆ Bluetooth devices Cautions on using Bluetooth devices In the bandwidth used by this terminal, in addition to home electric appliances such as a microwave oven and industrial/scientific/medical devices, in-plant radio stations used to identify mobile objects used in production lines of a factory that require a license, specified low power radio stations, or amateur radio stations that do not require a license (hereafter "other radio stations") can be in operation. 1.
- When multiple wireless LAN access points exist near the terminal and they use the same channel, search may not be performed correctly. ・ Frequency bands Frequency bands for WLAN devices are written on battery pack insert section of the terminal. Label description are as follows. a b Cautions on using 2.
◆ FeliCa reader/writer Waterproofness ・ FeliCa reader/writer function of the terminal uses weak waves requiring no licenses for radio stations. ・ It uses 13.56 MHz frequency band. When using other reader/writers in your surroundings, keep the terminal away sufficiently from them. Before using the FeliCa reader/writer, confirm that there are no radio stations using the same frequency band nearby.
・ You can eliminate the dirt by shaking several times in static water of wash-basin. - With the back cover steadily attached and pressing and holding the external connection jack/stereo earphone jack cap not to open, wash the terminal without using a brush or sponge. ◆ To ensure waterproofness To avoid water ingress, be sure to observe the following points. ・ Do not throw any liquid other than room-temperature tap water on the terminal, or soak it in such liquid.
◆ Important precautions ・ Do not leave water on the microphone, earpiece or Do not perform actions shown in the illustrations below. ・ If the back cover is damaged, replace it. Water may enter inside from a damaged section causing troubles such as electric shocks or corrosion of the battery.
◆ Draining water from the terminal c Swing the terminal in about 10 times against dry, clean cloth etc. to wipe off water remaining in the microphone, earpiece, speaker, keypad, or charging jack, etc. When the terminal is wet, water may flow out after wiping it off; drain the water in the following steps. a Hold the terminal firmly and wipe off moisture on the terminal surface and back side with dry, clean cloth etc.
◆ Charging Check the following before and after charging. ・ Check if the terminal is not wet. Never try to charge the battery pack when the terminal is wet. ・ Accessories and optional devices are not waterproof. ・ When charging the battery when or after the terminal gets wet, adequately drain it and wipe off water with a dry, clean cloth etc., before connecting the accessory wireless charger or opening the external connection jack cap.
Before using the terminal a Stereo earphone jack b Earpiece c Proximity sensor Prevents the erroneous operation of the touch panel during a call. * Putting a protective sheet or seal on the proximity sensor may cause erroneous operation. d Light sensor Sense ambient brightness and automatically adjusts brightness of the display backlight. * When the sensor is covered, adjustment may not be performed properly.
r mark Installation of IC card * Place mark over the IC card reader to use Osaifu-Keitai, or if you download compatible applications, you can send and receive data via iC transmission. IC card cannot be removed. s Speaker t External connection jack Connect the included PC connection USB cable T01, etc. docomo mini UIM card The docomo mini UIM card is an IC card in which user information such as your phone number etc. is saved. ･ You can use the terminal only with docomo mini UIM card.
■ Removing Battery pack a Press the lock with your finger (a) and pull docomo mini UIM card out 2-3 mm toward b b Lift your finger from the lock, press docomo mini UIM card lightly and slide it toward b ･ Do not press docomo mini UIM card downward forcefully. ◆ Attaching/Removing battery pack ･ Attach/Remove the battery pack after turning OFF the power. ･ When you attach/remove the back cover, hold the Lock a ･ ･ terminal in your hand so that you will not scratch the display etc.
b Put your fingernail into the back cover removing part b and lift the back cover vertically to remove ･ To ensure waterproofness, the back cover is structured to attach firmly. If you have difficulties to remove, remove it strongly. e Fit the tabs on the reverse side of the back cover with the grooves on the terminal, press firmly to close ･ Check if there is no gap at all in order to maintain waterproofness, and attach securely.
❖ Operation time on full charge Charging (approximate) The following time varies by the charging method and operating environment.→ ❖ Precautions on charging ･ If you use the terminal while charging, it may take time Continuous FOMA/ Stationary (Auto) : Approx. 450 H stand-by 3G Moving (Auto) : Approx. 388 H time Moving (3G static) : Approx. 388 H to complete charging or charging may not complete. ･ It is normal for the terminal or AC adapter to become ･ ･ warm while charging.
✔INFORMATION ･ You can put only the battery pack on the wireless charger ･ ･ ･ ･ ･ ･ ･ ･ ･ ･ ･ to charge. Put the battery pack with the TL mark down on the TL mark of the wireless charger. Charge the battery putting the wireless charger on the stable and flat place. Always remove the AC adapter from the outlet when not using the adapter for an extended period.
◆ Charging with AC adapter ✔INFORMATION ･ FOMA charging microUSB adapter T01 is an adapter for Charge the terminal with FOMA AC Adapter 01/02 (optional) and the FOMA charging microUSB adapter T01 (optional).
Turning power ON/OFF Basic operation (Using touch panel) ◆ Turning power ON The display of the terminal is a touch panel which you can operate by directly touching with your finger or the included touch pen. A motion sensor detects the orientation and movement of the terminal so that the screen switches depending on if the terminal is held vertically or horizontally. Press and hold X (approx. 2 sec.) until the 1 illumination lights green The lock screen appears following the startup screen.
◆ Main operations ❖ Pinch ❖ Tap/Double-tap Touch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers distance. Tap : Touch the screen lightly and release the finger. Operation can be valid at the instant of releasing the finger or touch pen from the screen. Double-tap : Tap twice quickly. ❖ Flick Touch the screen and sweep the finger or touch pen quickly.
Initial setting Screen/Icon ◆ Icons on the status bar You can set necessary items collectively for the first time to use the terminal. ･ Each setting can be changed anytime. 1 Various conditions can be checked with notification icons and status icons appearing on the status bar. From the Home screen, m→[Settings]→ [Initial setting] Notification icon Status icon Status bar each item 2 Set 自分からだ設定 : Set pedometer/ACT monitor or Voice adjust.→P82 Lock screen authentication : Set screen lock.
◆ Notification panel : Receiving 1Seg : Recording 1Seg ：Notification icon (software update available) ：Notification icon (software update completed) When a notification icon appears, you can open the Notification panel to check information on messages or schedule etc.
◆ When the screen display is turned off ◆ When lock screen appears the key on the lock screen right 1 Slide The lock is canceled. When no operation is performed in certain period of time, the display is automatically turned off according to the screen time out setting and the terminal goes into sleep mode. or B 1X Sleep mode is deactivated, and the lock screen appears. ✔INFORMATION ･ When activating sleep mode manually, press X while in display mode.
f sp-mode mail Tap to use sp-mode mail. g Browser Tap to use Browser. docomo Palette UI ✔INFORMATION ･ From the Home screen, m→Tap [Settings] to display the Home screen setting menu.→P67 Home screen is a start screen to use applications. You can return to the Home screen anytime by pressing B. ･ Flick any of up to 12 Home screens left and right to switch to use. ◆ Customizing the Home screen You can locate application shortcuts, widgets, etc. on the Home screen.
◆ Adding/deleting Home screen ✔INFORMATION ･ You can also set Kisekae or Wallpaper from the Home From the Home screen, m→[ホーム画面一 1 覧] screen. Tap m→[Kisekae/Wallpaper]. ･ Even though 2 or more widgets for speed dials are pasted, up to 4 items can be registered. All widgets for speed dials are linked and their contents become the same. required operations 2 Perform Adding : [＋] Sorting : Select the Home screen icon (1 sec. or more) →Drag to the destination Deleting : Select the Home screen icon (1 sec.
Profile You can check your own number on the terminal. You can also enter and edit your own information.
Specific Absorption Rate (SAR) of Mobile Phones This model F-03D mobile phone complies with Japanese technical regulations and international guidelines regarding exposure to radio waves. This mobile phone was designed in observance of Japanese technical regulations regarding exposure to radio waves (*1) and limits to exposure to radio waves recommended by a set of equivalent international guidelines.
◆ Declaration of Conformity ◆ Federal Communications Commission (FCC) Notice ･ This device complies with part 15 of the FCC rules. The product "F-03D" is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) and 3.2. The Declaration of Conformity can be found on http:// www.fmworld.net/product/phone/doc/. ･ This mobile phone complies with the EU requirements for exposure to radio waves.
Before a phone model is available for sale to the public, it must be tested and certified to prove to the FCC that it does not exceed the limit established by the U.S. governmentadopted requirement for safe exposure. The tests are performed on position and locations (for example, at the ear and worn on the body) as required by FCC for each model. The highest SAR value for this model phone as reported to the FCC, when tested for use at the ear, is 0.42 W/kg, and when worn on the body, is 1.03 W/kg.
Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15 cm be maintained between a mobile phone and a pace maker to avoid potential interference with the pacemaker. To achieve this use the phone on the opposite ear to your pacemaker and does not carry it in a breast pocket. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.
*3 *4 *5 WPA2 WPA2 conforms to IEEE Standard 802.11i, improves WPA authentication and maintains backward compatibility. Using Advanced Encryption Standard (AES) as encryption method, WPA2 authentication becomes essential for Wi-Fi authentication today. Enterprise and Personal are used for authentication of both WPA and WPA2. Enterprise authenticates using 802.1x and EAP and Personal authenticates using pre-shared key (WPA/WPA2-PSK). EAP stands for Extensible Authentication Protocol.
◆ Trademarks ･ Facebook and Facebook logo are trademarks or Company and product names mentioned in this manual are trademarks or registered trademarks of their respective holders. ･ "FOMA", "i-mode", "i-Dppli", "Deco-mail", "ToruCa", "mopera", "mopera U", "WORLD CALL", "iD", "WORLD WING", and logo of "iD" are trademarks or registered trademarks of NTT DOCOMO. ･ "Catch Phone (Call waiting service)" is a registered trademark of Nippon Telegraph and Telephone Corporation.
･ Wi-Fi, Wi-Fi Alliance, WMM and logos of Wi-Fi and ･ This product is licensed under the VC-1 Patent Portfolio Wi-Fi CERTIFIED are registered trademarks of Wi-Fi Alliance. Wi-Fi CERTIFIED, WPA, WPA2 and Wi-Fi Protected Setup are trademarks of Wi-Fi Alliance. AOSS is a trademark of BUFFALO INC.
General Inquiries Repairs ■ From DOCOMO mobile phones (In Japanese only) 0120-005-250 (toll free) * Service available in: English, Portuguese, Chinese, Spanish, Korean. * Unavailable from part of IP phones. (Business hours : 9:00 a.m. to 8:00 p.m.) ■ From DOCOMO mobile phones (In Japanese only) (No prefix) 151 (toll free) (No prefix) 113 (toll free) * Unavailable from land-line phones, etc.
