User Manual Part 5
F-03B_EN_FCC
24
Basic Operation
Before Using
Charging
The battery pack does not have a full charge at time of purchase.
Use AC adapter for FOMA terminal to charge the battery before
using FOMA terminal.
a
Insert the AC adapter to the desktop holder, with the
arrow on the AC adapters connector upward.
b
Unfold the AC adapters power plug and insert it into a
100V AC outlet.
c
With FOMA terminal closed, insert it into the desktop
holder.
*
Check that the light turns on.
d
After charging is completed, remove FOMA terminal
from the desktop holder.
a
Open jack cap (
a
) of FOMA terminal, hold the
connector horizontally with the arrow side upward and
insert it to the jack. (
b
)
b
Unfold the power plug and insert it into a 100V AC
outlet.
c
When charging is over, pull out the power plug from the
outlet, and pull out from FOMA terminal horizontally
while pressing the release buttons on both sides of the
connector.
✜
Operations for charging
When charging starts, a charge start alert sounds. While charging, the
light turns on and the battery icons on the display and the sub-display
blink. When charging is over, a charge completion alert sounds.
Using desktop holder and AC adapter in
combination for charging
Light AC adapter 100V AC outlet
Release
button
Power plug
Connector
Insert at the back side
Desktop holder
Charging using AC adapter
Light
Power plug
100V AC outlet
Connector
Release button
External
connection
jack
Jack cap
AC adapter