User Manual Part 3
F-02B_EN_ninshou
28
Basic Operation
Before Using
Turning power ON - Initial Setting
Perform the following operations after turning the power ON for
the first time.
a
f
(2 sec. or more)
b
"Yes" or "No" on a confirmation
screen of enlarged menu setting
c
Set required items on Initial
setting screen
eC
[Quit]
Always set Password and Request permit/
deny. If you exit without setting, Initial
setting screen reappears when the power
is turned ON the next time.
d
g
on a confirmation screen of software update
function
The stand-by display appears.
Point
Turning power off :
f
(2 sec. or more)
Changing the initial setting :
me
hgdg
・
If no operation is performed, the display light is turned off
automatically according to the settings in
【
Light time-out
】
or
【
Power saving mode
】
. The display light turns on again if there is
any operation or incoming call.
<Initial setting screen>
Information
Before Using
User information
Check your own phone number.
For details of checking/changing a mail address, refer to "Mobile
Phone User's Guide [i-mode] FOMA version".
a
me
0
User information
The screen shown to the right appears.
Point
Editing user information :
On User information edit screen,
C
[Edit]
e
Authenticate
e
Set required items
eC
[Save]
Checking a phone number during a call :
se
0
<User information screen>