User Manual Part 3
F-02B_EN_ninshou
26
Basic Operation
✜
Installing back cover
Place the 8 tabs of back cover to the notches, press back cover in the
direction of
a
to avoid forming any clearance between FOMA
terminal and back cover, then slide it in the direction of
b
to install it.
Finally, slide the lever in the direction of
c
to lock.
Point
・
The inner cover can be solidly closed for maintaining water-/dust-proof
performance. Opening the cover forcibly may injure your nails or fingers.
・
To prevent damage due to excessive force, the hinge of the inner cover
(the section where FOMA terminal makes contacts) is designed to be
removed. If it is detached, align metal pins on the inner cover with the
slots on FOMA terminal, and then press the cover until it clicks.
a
b
Back cover
Lever
Before Using
Charging
The battery pack does not have a full charge at time of purchase.
Use AC adapter for FOMA terminal to charge the battery before
using FOMA terminal.
a
Insert the AC adapter to the desktop holder, with
the arrow on the AC adapters connector upward.
b
Unfold the AC adapters power plug and insert it
into a 100V AC outlet.
c
With FOMA terminal closed, insert it into the
desktop holder.
* Check that the light turns on.
d
After charging is completed, remove FOMA
terminal from the desktop holder.
Using desktop holder and AC adapter in
combination for charging