User's Manual

F-01D_EN_ninshou.pdf
Before using the Xi terminal
25
◆ Turning power OFF
1
Press and hold X until the phone
options menu appears
2
[Power off] → [OK]
After vibrating once, the terminal turns off.
The Xi terminal display is composed of a touch panel
designed for being touched directly with fingers. The Xi
terminal supports a motion sensor that senses the
orientation or motion of the terminal. You can switch the
display view by tilting the Xi terminal vertical or
horizontal.
◆ Notes for using the touch panel
The touch panel is designed for being touched lightly with
fingers. Do not push it forcibly with a finger or press it with
sharp objects (nail, ballpoint pen, pin, etc.).
･ Touching the touch panel may not work in the following
cases. Note that it may cause malfunction.
- Operation with gloved hands
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet or seal on the display
- Operation with wet hand
- Operation under water
◆ Main operations
❖ Tap/Double-tap
Tap : Touch the screen lightly and release. The operation
becomes effective when you release your finger from
the screen.
Double-tap : Tap twice quickly. By double-tapping you can
zoom in/out the screen such as web page or still image.
❖ Touch and hold for 1 second or more
Touch and hold the screen for 1 second or more and
release. You may need to perform the subsequent action
with your finger kept touching the screen.
* In this manual, the operation may be described as "(1 sec. or
more)".
❖ Drag/Slide/Pan
Drag : Touch an item or icon on the screen and move it to
the desired position.
Slide : Touch the screen and crisscross.
Pan : Drag the screen in any direction to view the desired
part.
･ The operation is used when displaying in a single view
is not available, such as viewing a web page, Office file,
or enlarged still image etc.
Basic operation (Using touch
panel)
Example : Tap