User's Manual

F-01D_EN_ninshou.pdf
Before using the Xi terminal
21
The miniUIM is an IC card that stores user information.
･ If the miniUIM is not attached, you cannot use some
functions of the Xi terminal.
･ For details on miniUIM, refer to the miniUIM manual.
◆ Attaching/Removing miniUIM
･ Attach/Remove the miniUIM after turning OFF the
power.
■ Attaching
Open the slot cap of the Xi terminal ( a ), align the miniUIM
with the UIM card mark on the back side of the Xi terminal
and insert it in the direction of b all the way until it clicks.
･ Check the orientation of UIM corner cut.
■ Removing
Open the slot cap of the Xi terminal ( a ), press the miniUIM
lightly toward b , pull out straight the popped out miniUIM
in the direction of c .
✔ INFORMATION
･ When handling miniUIM, take care not to touch or scratch
the IC part. Note that attaching or removing miniUIM
forcibly into the Xi terminal may damage miniUIM.
･ Note that the miniUIM card may pop out of the Xi
terminal when removing it.
◆ Security codes of miniUIM
A miniUIM has a security code named PIN code. The PIN
code is set to "0000" by default, which you can change by
yourself. → P45
miniUIM
IC
mini UIM card
Corner cut
b
a
b
c
a