User's Manual

F-01C_EN_ninshou
24
Basic Operation
Before Using
Charging
The battery pack does not have a full charge at time of purchase.
Use AC adapter for FOMA terminal to charge the battery before
using FOMA terminal.
a Insert the connector of AC adapter horizontally to the
accessory desktop holder, with the arrow mark side upward
b Unfold the AC adapters power plug and insert it into a
100V AC outlet
c With FOMA terminal closed, insert it into the desktop holder
* Check that the indicator light turns on.
d After charging is completed, remove FOMA terminal
from the desktop holder
a Open jack cap ( a ) of FOMA terminal, hold the
connector horizontally with the arrow side upward and
insert it to the jack (
b )
b Unfold the power plug and insert it into a 100V AC
outlet
* Check that the indicator light turns on.
c When charging is over, pull out the power plug from
the outlet, and pull out from FOMA terminal
horizontally while pressing the release buttons on both
sides of the connector
✜ Operations for charging
When charging starts, a charge start alert sounds. While charging, the
light turns on and the battery icon on the display blinks. When
charging is over, a charge completion alert sounds.
Using desktop holder and AC adapter in
combination for charging
100V AC outlet
Light
Release
buttons
Connector
Desktop holder
Insert at the back side
AC adapter
Power plug
Charging using AC adapter
100V AC outlet
Connector
Release
buttons
External
connection jack
Jack cap
Power plug
AC adapter
Light