User's Manual

F-01C_EN_ninshou
18
Introduction
Waterproofness/Dustproofness
F-01C provides waterproofness of IPX8
*3
which exceeds IPX5
(former JIS protection code 5)
*1
, IPX7 (former JIS protection code
7)
*2
and dustproofness of IP5X (JIS protection code 5)
*4
with firmly
closing the external connection jack cap and HDMI connection jack
cap and installing the back cover in a locked state.
*1 IPX5 means that a phone keeps functioning after applying a jet flow of 12.5
L/min. from every direction from a distance of approximately 3 m for at
least 3 minutes using water nozzle in 6.3 mm inner diameter.
*2 IPX7 means that a phone keeps functioning after F-01C is slowly submerged
to depth of 1 m in static tap water at room temperature, left there for 30
minutes and then taken out.
*3 IPX8 means that it provides waterproofness of which exceeds of IPX7
standard.
*4 IPX5 means a protection degree that a phone keeps functioning and safety
after it is placed in a device with dust in diameter 75 μ or less for 8 hours,
agitated and then taken out.
F-01C provides the following waterproof performances of IPX8.
･ F-01C keeps functioning after it is slowly submerged to depth of 1.5
m in static tap water at room temperature, left there for
approximately 30 minutes and then taken out.
･ The mobile phone keeps shooting still images or moving pictures in
approximately 30 minutes in static tap water at room temperature.
✜ What you can do with waterproofness/dustproofness
of F-01C
・ You can talk or watch 1Seg programs without using an umbrella in
the rain (for rainfall of 20 mm or less per hour).
- When your hands or FOMA terminal are wet, avoid installing/
removing the back cover or opening/closing the external
connection jack cap.
・ You can also shoot still images and moving pictures in the pool
depth of 1.5 m.
- Do not perform other operations underwater than shooting still
images and moving pictures.
- If you put the terminal in water of swimming pool, be sure to have
it within 30 minutes.
- If FOMA terminal gets wet with water from the swimming pool,
wash it in specified procedure ( ⇒ P20).
・ You can use FOMA terminal in a bathroom.
- Do not put the terminal in the bathtub. Do not use the terminal in
hot water. May cause malfunction.
- Never put FOMA terminal in hot spring water or water containing
soap, detergent or bath powder.
To ensure waterproofness/dustproofness
To avoid water/dust ingress, be sure to observe the following points.
・ Do not throw any liquid other than room-temperature tap water on
FOMA terminal, or soak it in such liquid.
・ Open/close the external connection jack cap and HDMI connection
jack cap as described below.
<Opening the external connection jack cap>
Pull the cap up with your finger by the groove.
Grooves