User Manual Part 3
Table Of Contents
F-01B_usugata_1kou_0729
26
Basic Operation
Before Using
Charging
The battery pack does not have a full charge at time of purchase.
Use AC adapter for FOMA terminal to charge the battery before
using FOMA terminal.
a
Insert the AC adapter to the desktop holder, with
the arrow on the AC adapters connector upward.
b
Unfold the AC adapters power plug and insert it
into a 100V AC outlet.
c
With FOMA terminal closed, insert it into the
desktop holder.
* Check that the light turns on.
d
After charging is completed, remove FOMA
terminal from the desktop holder.
a
Open jack cap (
a
) of FOMA terminal, hold the
connector horizontally with the arrow side
upward and insert it to the jack. (
b
)
b
Unfold the power plug and insert it into a 100V
AC outlet.
c
When charging is over, pull out the power plug
from the outlet, and pull out from FOMA terminal
horizontally while pressing the release buttons
on both sides of the connector.
✜
Operations for charging
When charging starts, a charge start alert sounds. While charging, the
light turns on and the battery icons on the display and the sub-display
blink. When charging is over, a charge completion alert sounds.
Using desktop holder and AC adapter in
combination for charging
100V AC outlet
Light
Release button
Connector
Desktop holder
Insert at the back side
AC adapter
Power plug
Charging using AC adapter
100V AC outlet
Connector
Release button
External
connection
jack
Jack cap
Power plug
AC adapter
Light