User Manual
33
Before Using the Handset
F906i_E1kou
: Scheduler/Schedule reminder ringing (including activation notification of
1Seg)
: Fake call
: User information
: Calculator
: Pedometer
: Search engine
: Notepad
: Dictionaries
: Accessing Data Center
: Displaying synchronization log
: Network services set
/ : Calling or communicating packets via USB/Sending or receiving packets
via USB
: 64K data communication
: Accessing external data
/ : Updating software/Software update notified
: Updating pattern definition/Displaying version
/ (gray) : Each function set or on hold
◆
Guide area
Operations that can be performed by pressing
m
,
I
,
g
,
C
and
a
are
displayed in the guide area. Displayed operations vary by the screen.
Display locations and keys correspond as shown in the figure.
･
on the guide area corresponds to multi-cursor keys
k
(It may be different
depending on the function you are using or how the site or website is made).
･
When the display is placed in horizontal position, this is displayed at the left
bottom of the display.
･
In wide display, press
*
to display a guide area each time you press this key,
it switches guide area display/hide (except during 1Seg watching).
◆
List screen
a
When a list extends to multiple pages, the currently displayed page number and
the total number of pages appear.
b
The items can be selected by pressing the keypads corresponding to the
displayed number (
1
-
9
,
0
). On vertical display, item can be selected
also by pressing the displayed next key.
:
*
: Side key [
▲
]
:
#
: Side key [
▼
]
:
M
c
indicates that there are items that can be selected above and below the
cursor position. Press
j
to move the cursor. When
d
is pressed on the last
item of the page, the next page appears, when
u
is pressed on the first item
of the page, the previous page appears.
indicates that there are items that can be selected over the multiple pages.
Press
h
to change the page. Some screens such as an icon selection screen
cannot be switched.
Guide area
a
c
b
L03.fm Page 33 Monday, November 10, 2008 4:42 PM