User Manual
49
Before Using the Handset
F906i_E1kou
✔
INFORMATION
･
When turning FOMA terminal ON, do not touch the fingerprint sensor with fingers
before the stand-by display appears.
･
When UIM is replaced, authentication is required after turning ON FOMA terminal.
When authentication has succeeded, the stand-by display appears. If an incorrect
terminal security code is entered 5 times consecutively or if authentication has failed
5 times consecutively when Fingerprint access is "ON", the power is automatically
turned OFF (the power can be turned ON again).
･
If no operations are performed for approximately 5 minutes with FOMA terminal
open, the display is automatically deactivated (power saving mode). The same
situation occurs during voice call. The display light is turned on again if there is any
operation or incoming call.
Select language
Switching to English
1
m
[Settings & NW services]
273e1
or
2
✔
INFORMATION
･
The setting of Select language is saved to UIM.
･
Even if this setting is set to "English", the displayed menu is not switched to English
for some Kisekae Tool. Note that, when a Kisekae Tool in "Preinstalled" folder is set,
a menu dedicated to "English" appears.
･
Even if changing this setting, the title of Shortcut icon is not changed from the
language set when the shortcut icon was pasted.
Date & time
Setting date and time
You can set so that the time or time difference is automatically corrected or
directly enter the date and time. With automatic correction set, the time is
corrected when receiving the time information from DOCOMO's network in Japan
or the time difference correction information from the telecommunications carrier
used overseas.
1
m
[Settings & NW services]
721e
Set the required
items
eC
Auto time adjust :
Set if you automatically correct time.
･
When "ON", Offset can be set.
･
When "OFF", set the date and time. Time zone and Summer time may
also be set.
Offset :
When "+", the displayed time is always set forward the specified
period of time from the corrected time. When "-", the displayed time is
always set back the specified period of time from the corrected time.
Date :
The date can be entered up between January 1, 2000 and December 31,
2050.
Time :
Enter the time in the 24-hour format.
Time zone :
When moving to a place with time difference, set the time zone
without changing the date and time settings.
･
Time difference from the previously set time zone is calculated and
displayed.
･
Set "GMT+09:00" in Japan.
Summer time :
When "ON", the displayed time is set forward one hour from
the specified time.
✔
INFORMATION
<When setting Auto time adjust to "ON">
･
Time or time difference is corrected when FOMA terminal is turned ON etc. If not
corrected for a while after turning FOMA terminal ON, once turn FOMA terminal OFF
and then turn it ON again. With no UIM installed or for some radio wave conditions,
time is not corrected even if FOMA terminal is once turned OFF and turned ON again.
For some i-
α
ppli, time correction is unavailable during operation.
･
The corrected time or time difference may have an error of several seconds.
L03.fm Page 49 Monday, November 10, 2008 4:42 PM